Kevin Corry wrote: > Molle Bestefich wrote: >> I can't get dm_mon to load the raid1 target. > > Do you mean "dm_mod", which is the core of the DM driver? Yes :-). >> The syslog says (timestamps removed): >> [...] > > This means a user-space program tried to load a device-table for a target-type > that doesn't exist or couldn't be loaded. > >> I'm booting with a Gentoo CD [gen2dmraid 0.99 - kernel: 2.6.9, driver >> 4.1.0, library 1.00.17-ioctl]. >> >> The /lib/modules/.../raid1.ko file is present. > > That is the module for MD/Software-RAID RAID-1, not the Device-Mapper > mirroring module. They are completely different drivers that just happen to > be in the same directory in the kernel source and module trees. Ack. Thank you for clearing that up. I've never been able to install a working copy of Linux on my PC, so I don't know squat. Linux cannot use the disks on my ATARAID controller, even though it says on the box that the controller supports Linux. Using the proprietary driver, I can't recompile the kernel with eg. appropriate sound card drivers and the open source ATARAID driver isn't up-to-date with the metadata format. I'm trying again now that DM and DMRAID has arrived, but (as is probably apparent), I haven't got a clue what I'm doing :-) >> Any hints on what is going wrong / what I am doing wrong? > > The Device-Mapper mirroring target is called "dm-mirror". Check your kernel > configuration and make sure you have CONFIG_DM_MIRROR set to "y" or "m". If > necessary, you may need to rebuild your kernel to enable it. Once it's > enabled, run "dmsetup targets" and look for a "mirror" entry. If you've > compiled DM mirroring as a module, try "modprobe dm-mirror", and then run > "dmsetup targets" again. Gerte, is there somehow that I can persuade you to build a new LiveCD with dm-mirror support? I would like to do it myself, but am a bit stuck since no Linux distro will install on my PC :-/..