On Tue, Oct 26, 2004 at 02:52:21PM -0500, pagcal@xxxxxxxxxx wrote: > Thanks for the help so far. > > The second command you sent fails. To setup a raid1 I did Hrm, braino typing off the top of my head ;) > > 0 160000 mirror disk 3 /dev/hdb1 2048 sync 2 /dev/hdb2 0 /dev/hdb3 0 > > What's the meaning of the 2048? Your example had 64. Is that the number of sectors per bit in the bitmap? If not, what? That's the region size in sectors. State (dirty/clean and sync/nosync) is kept on a per region base. > > Is there any way I can tell how the 'sync' daemon is progressing? dmtable status YourMappedDevice Look at the regions_done/regions_total at the end of the output line. > > It seemed to startup these kernel threads. > > [kmirrord/0] > [kcopyd] Yes. > > I could mkfs and mount the file system. Ok. > > Cal Page > > > > -- > > dm-devel@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/dm-devel -- Regards, Heinz -- The LVM Guy -- *** Software bugs are stupid. Nevertheless it needs not so stupid people to solve them *** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Red Hat GmbH Consulting Development Engineer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@xxxxxxxxxx +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-