On Tue, Oct 26, 2004 at 11:11:29AM +0200, Michael Thonke wrote: > Hello, > a while ago I asked how to setup a mirror target with device mapper. It is > missing some documentation how to do it in a proper way? Any docs or How > to's for this? Source ;) Read about table spec in mirror_ctr() in drivers/md/dm-raid1.c. Eg.: 0 160086522 mirror core 2 64 nosync 2 /dev/sdc 0 /dev/sdd 0 would set up a set with 2 mirrors using a core (transient) dirty-log if you feed it into "dmsetup create". > > Thanks for help > > -- > > dm-devel@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/dm-devel -- Regards, Heinz -- The LVM Guy -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Red Hat GmbH Consulting Development Engineer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@xxxxxxxxxx +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-