> > Installed 0.4.0 and compile multipathd with DEBUG=3. > In multipath/Makefile > > endif > > EXEC = multipath > DEBUG = 3 > > all: $(BUILD) > If you want more verbose log from the daemon (in daemon.log), compile with LOGLEVEL=7. DEBUG=3 is for multipath only, not for the daemon. > The following is displayed after the daemon is restarted though: > > Device Mapper prerequisites not met > Quite explicit. You need linux kernel 2.6.10-rc?-udm2 to run the tools. > Setup DEBUG=3 in multipath/Makefile. > > > Few additional things: > > The output of multipath -v2 is now: > > Device mapper prerequisites not met. > ditto > > I have hotplug-2004-09-23 > Device-mapper-1.00.19 > Multipath-tools-0.4.0 > Kernel 2.6.5-7.111.5 (Could this be the problem?) > It is. Either stick with the tools provided by Suse or upgrade the kernel and use the vanilla tools. regards, -- christophe varoqui <christophe.varoqui@xxxxxxx>