From: Wang Dongsheng <dongsheng.wang@xxxxxxxxxxxxx> RCPM is the Run Control and Power Management module performs all device-level tasks associated with device run control and power management. Add this for freescale powerpc platform and layerscape platform. Signed-off-by: Chenhui Zhao <chenhui.zhao@xxxxxxxxxxxxx> Signed-off-by: Tang Yuantian <Yuantian.Tang@xxxxxxxxxxxxx> Signed-off-by: Wang Dongsheng <dongsheng.wang@xxxxxxxxxxxxx> --- *v4* - Change patch subject. - A few grammatical mistakes. - Change "rcpm-wakeup" property to "fsl,rcpm-wakeup" property. - Remove a few "fsl,<chip>-rcpm" examples. - Now the value of "fsl,#rcpm-wakeup-cells" is not contain rcpm node. - Add a NOTE to describe IPPDEXPCR register. *v3* - Add "fsl,#rcpm-wakeup-cells" for rcpm node. The number of cells correspond rcpm-wakeup property. - Modify rcpm-wakeup property description. *v2* - Remove P4080 example. - Modify rcpm-wakeup property description. diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt new file mode 100644 index 0000000..757e0eb --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -0,0 +1,64 @@ +* Run Control and Power Management +------------------------------------------- +The RCPM performs all device-level tasks associated with device run control +and power management. + +Required properites: + - reg : Offset and length of the register set of the RCPM block. + - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + fsl,rcpm-wakeup property. + - compatible : Must contain a chip-specific RCPM block compatible string + and (if applicable) may contain a chassis-version RCPM compatible + string. Chip-specific strings are of the form "fsl,<chip>-rcpm", + such as: + * "fsl,p2041-rcpm" + * "fsl,p5020-rcpm" + * "fsl,t4240-rcpm" + + Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>", + such as: + * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm + * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm + * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + +All references to "1.0" and "2.0" refer to the QorIQ chassis version to +which the chip complies. +Chassis Version Example Chips +--------------- ------------------------------- +1.0 p4080, p5020, p5040, p2041, p3041 +2.0 t4240, b4860, b4420 +2.1 t1040, ls1021 + +Example: +The RCPM node for T4240: + rcpm: global-utilities@e2000 { + compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + fsl,#rcpm-wakeup-cells = <2>; + }; + +* Freescale RCPM Wakeup Source Device Tree Bindings +------------------------------------------- +Required fsl,rcpm-wakeup property should be added to a device node if the device +can be used as a wakeup source. + + - fsl,rcpm-wakeup: Consists of a pointer to the rcpm node and the IPPDEXPCR + register cells. The number of IPPDEXPCR register cells is defined in + "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + the bit mask that should be set in IPPDEXPCR0, and the second register + cell is for IPPDEXPCR1, and so on. + + Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a + mechanism for keeping certain blocks awake during STANDBY and MEM, in + order to use them as wake-up sources. + +Example: + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>; + clock-names = "ipg"; + fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>; + status = "disabled"; + }; -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html