We need to keep initial st_nci_gates values in order for
nci_hci_dev_connect_gates to create and open pipe when necessary.
For example after a firmware update CLF pipes are cleared. Changing pipe
values in st_nci_gates was causing nci_hci_dev_connect_gates not using
accurate pipes value.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
---
drivers/nfc/st-nci/se.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c
index 3522165..df2dc54 100644
--- a/drivers/nfc/st-nci/se.c
+++ b/drivers/nfc/st-nci/se.c
@@ -232,13 +232,13 @@ int st_nci_hci_load_session(struct nci_dev *ndev)
if (j < ARRAY_SIZE(st_nci_gates) &&
st_nci_gates[j].gate == dm_pipe_info->dst_gate_id &&
ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) {
- st_nci_gates[j].pipe = pipe_info[2];
+ ndev->hci_dev->init_data.gates[j].pipe = pipe_info[2];
ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] =
- st_nci_gates[j].pipe;
- ndev->hci_dev->pipes[st_nci_gates[j].pipe].gate =
+ pipe_info[2];
+ ndev->hci_dev->pipes[pipe_info[2]].gate =
st_nci_gates[j].gate;
- ndev->hci_dev->pipes[st_nci_gates[j].pipe].host =
+ ndev->hci_dev->pipes[pipe_info[2]].host =
dm_pipe_info->src_host_id;
}
kfree_skb(skb_pipe_info);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
