> On Sun, Aug 23, 2015 at 8:09 AM, Yaniv Gardi <ygardi@xxxxxxxxxxxxxx> > wrote: >> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS >> a platform device. >> In order to do so a few additional changes are required: >> 1. The ufshcd-pltfrm is no longer serves as a platform device. >> Now it only serves as a group of platform APIs such as PM APIs >> (runtime suspend/resume, system suspend/resume etc), parsers of >> clocks, regulators and pm_levels from DT. >> 2. What used to be the old platform "probe" is now "only" >> a pltfrm_init() routine, that does exactly the same, but only >> being called by the new probe function of the UFS variant. >> >> Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx> >> >> --- >> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 2 +- >> drivers/scsi/ufs/ufs-qcom.c | 78 >> +++++++++++++++++- >> drivers/scsi/ufs/ufshcd-pltfrm.c | 92 >> ++++++---------------- >> drivers/scsi/ufs/ufshcd-pltfrm.h | 41 ++++++++++ >> drivers/scsi/ufs/ufshcd.c | 10 +++ >> drivers/scsi/ufs/ufshcd.h | 1 + >> 6 files changed, 152 insertions(+), 72 deletions(-) >> create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.h >> >> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt >> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt >> index 5357919..b39e765 100644 >> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt >> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt >> @@ -4,7 +4,7 @@ UFSHC nodes are defined to describe on-chip UFS host >> controllers. >> Each UFS controller instance should have its own node. >> >> Required properties: >> -- compatible : compatible list, contains "jedec,ufs-1.1" >> +- compatible : compatible list, contains "jedec,ufs-1.1" or >> "qcom,ufshc" > > Replying again as I inadvertently dropped everyone. > > This should also have a more specific compatible string with the SOC > name/number in it. It may be "the same in all SOCs", but there is > always the possibility for bugs/limitations to be found that are > specific to an SOC even if all RTL versions are identical (e.g. > different max clock speeds). It is about making the dtb future proof, > not about what exactly you need today. You can keep qcom,ufshc for > driver matching if you want. > >> - interrupts : <interrupt mapping for UFS host controller IRQ> >> - reg : <registers mapping> > > What about phy properties? No Unipro PHY block that requires setup? phy properties will be updated in V8 that shortly will be uploaded. > > Rob > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
