Using constants for pinctrl allows better readability and removes
redundancy with comments. AM33XX_IOPAD allows us to use part of the
pinctrl physical address as in the TRM instead of an offset.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
arch/arm/boot/dts/am335x-boneblack.dts | 44 +++++++++++++++++-----------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index eadbba3..346f529 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -36,32 +36,32 @@
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
- 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* xdma_event_intr0 */
+ AM33XX_IOPAD(0x8a0, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, (PIN_OUTPUT | MUX_MODE0)) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, (PIN_OUTPUT_PULLDOWN | MUX_MODE0)) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, (PIN_OUTPUT_PULLDOWN | MUX_MODE0)) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, (PIN_OUTPUT_PULLDOWN | MUX_MODE0)) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, (PIN_OUTPUT_PULLDOWN | MUX_MODE0)) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* xdma_event_intr0 */
>;
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
