Add AHCI and PHY device nodes to BMIPS based BCM7360 platform. Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx> --- arch/mips/boot/dts/brcm/bcm7360.dtsi | 40 ++++++++++++++++++++++++++++++++ arch/mips/boot/dts/brcm/bcm97360svmb.dts | 8 +++++++ 2 files changed, 48 insertions(+) diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi index 9e1e571ba346..1f5c99e9d0d1 100644 --- a/arch/mips/boot/dts/brcm/bcm7360.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -183,5 +183,45 @@ interrupts = <66>; status = "disabled"; }; + + sata: sata@181000 { + compatible = "brcm,bcm7360-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x181000 0xa9c>, <0x180020 0x8>; + interrupt-parent = <&periph_intc>; + interrupts = <86>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@1800000 { + compatible = "brcm,bcm7360-sata-phy", "brcm,phy-sata3"; + reg = <0x180100 0x0eff>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts index eee8b0e32681..0088925cc36a 100644 --- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts @@ -40,3 +40,11 @@ &ohci0 { status = "okay"; }; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html