Add a regulator to control the OTG chargepath switch. The OTG
switch gets its power from pm8941_5vs1, and that should be expressed
as an usb_otg_in-supply property in the DT node for the charger driver.
The regulator name is "otg". This is used by USB code to control VBUS
direction.
Signed-off-by: Tim Bird <tim.bird@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/power_supply/qcom_smbb.txt | 20 ++++++
drivers/power/qcom_smbb.c | 74 ++++++++++++++++++++++
2 files changed, 94 insertions(+)
diff --git a/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
index 65b88fa..dc0f91d 100644
--- a/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
+++ b/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
@@ -105,6 +105,23 @@ PROPERTIES
regulation must be done externally to fully comply with
the JEITA safety guidelines if this flag is set.
+- usb_otg_in-supply:
+ Usage: optional
+ Value type: <phandle>
+ Description: Reference to the regulator supplying power to the USB_OTG_IN
+ pin.
+
+child nodes:
+- otg:
+ Usage: optional
+ Description: This node is used to define a regulator which is used by
+ other parts of the system to control the direction of VBUS
+ voltage - specifically: whether to supply voltage to VBUS for
+ host mode operation of the OTG port. The driver registers a
+ regulator with this name, which can be looked up by string.
+ Alternatively, you can add a DT label, which can then be
+ referenced by phandle.
+
EXAMPLE
charger@1000 {
compatible = "qcom,pm8941-charger";
@@ -128,4 +145,7 @@ charger@1000 {
qcom,fast-charge-current-limit = <1000000>;
qcom,dc-charge-current-limit = <1000000>;
+ usb_otg_in-supply = <&pm8941_5vs1>;
+
+ otg {};
};
diff --git a/drivers/power/qcom_smbb.c b/drivers/power/qcom_smbb.c
index 0dabfe8..fa2983a 100644
--- a/drivers/power/qcom_smbb.c
+++ b/drivers/power/qcom_smbb.c
@@ -34,6 +34,9 @@
#include <linux/power_supply.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#define SMBB_CHG_VMAX 0x040
#define SMBB_CHG_VSAFE 0x041
@@ -71,6 +74,8 @@
#define BTC_CTRL_HOT_EXT_N BIT(0)
#define SMBB_USB_IMAX 0x344
+#define SMBB_USB_OTG_CTL 0x348
+#define OTG_CTL_EN BIT(0)
#define SMBB_USB_ENUM_TIMER_STOP 0x34e
#define ENUM_TIMER_STOP BIT(0)
#define SMBB_USB_SEC_ACCESS 0x3d0
@@ -123,6 +128,9 @@ struct smbb_charger {
struct power_supply *dc_psy;
struct power_supply *bat_psy;
struct regmap *regmap;
+
+ struct regulator_desc otg_rdesc;
+ struct regulator_dev *otg_reg;
};
static int smbb_vbat_weak_fn(unsigned int index)
@@ -778,12 +786,56 @@ static const struct power_supply_desc dc_psy_desc = {
.property_is_writeable = smbb_charger_writable_property,
};
+static int smbb_chg_otg_enable(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ int rc;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+ OTG_CTL_EN, OTG_CTL_EN);
+ if (rc)
+ dev_err(chg->dev, "failed to update OTG_CTL\n");
+ return rc;
+}
+
+static int smbb_chg_otg_disable(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ int rc;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+ OTG_CTL_EN, 0);
+ if (rc)
+ dev_err(chg->dev, "failed to update OTG_CTL\n");
+ return rc;
+}
+
+static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ unsigned int value = 0;
+ int rc;
+
+ rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value);
+ if (rc)
+ dev_err(chg->dev, "failed to read OTG_CTL\n");
+
+ return !!(value & OTG_CTL_EN);
+}
+
+static struct regulator_ops smbb_chg_otg_ops = {
+ .enable = smbb_chg_otg_enable,
+ .disable = smbb_chg_otg_disable,
+ .is_enabled = smbb_chg_otg_is_enabled,
+};
+
static int smbb_charger_probe(struct platform_device *pdev)
{
struct power_supply_config bat_cfg = {};
struct power_supply_config usb_cfg = {};
struct power_supply_config dc_cfg = {};
struct smbb_charger *chg;
+ struct regulator_config config = { };
int rc, i;
chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
@@ -884,6 +936,28 @@ static int smbb_charger_probe(struct platform_device *pdev)
}
}
+ /*
+ * otg regulator is used to control VBUS voltage direction
+ * when USB switches between host and gadget mode
+ */
+ chg->otg_rdesc.id = -1;
+ chg->otg_rdesc.name = "otg";
+ chg->otg_rdesc.ops = &smbb_chg_otg_ops;
+ chg->otg_rdesc.owner = THIS_MODULE;
+ chg->otg_rdesc.type = REGULATOR_VOLTAGE;
+ chg->otg_rdesc.supply_name = "usb_otg_in";
+ chg->otg_rdesc.fixed_uV = 5000000;
+ chg->otg_rdesc.n_voltages = 1;
+ chg->otg_rdesc.of_match = "otg";
+
+ config.dev = &pdev->dev;
+ config.driver_data = chg;
+
+ chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc,
+ &config);
+ if (IS_ERR(chg->otg_reg))
+ return PTR_ERR(chg->otg_reg);
+
chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node,
"qcom,jeita-extended-temp-range");
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
