On Fri, Oct 09, 2015 at 08:54:33AM -0500, Rob Herring wrote: > On Fri, Oct 9, 2015 at 8:45 AM, Liviu Dudau <Liviu.Dudau@xxxxxxx> wrote: > > Juno R1 board sports a functional PCIe host bridge that is > > compliant with the SBSA standard found here[1]. With the right > > firmware that initialises the XpressRICH3 controller one can > > use the generic Host Bridge driver to use the PCIe hardware. > > > > Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx> > > > > [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ > > --- > > arch/arm64/boot/dts/arm/juno-r1.dts | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts > > index c627511..a702a6b 100644 > > --- a/arch/arm64/boot/dts/arm/juno-r1.dts > > +++ b/arch/arm64/boot/dts/arm/juno-r1.dts > > @@ -109,6 +109,26 @@ > > > > #include "juno-base.dtsi" > > > > + pcie-controller@40000000 { > > + compatible = "pci-host-ecam-generic"; > > I think this is the first case of real h/w using this. We should have > a specific compatible here additionally. Or maybe I can claim the use of the string on account on being the first on arm64 ;) I can add a vendor prefix if you want, but pci-host-generic is going to ignore it *because* it is trying to be a generic driver. > Perhaps the firmware did not setup something correctly. Hope not :) I no longer have that much input into the UEFI firmware, but for U-Boot is is all in the open and can be fixed at any time (?). Thanks for reviewing this! Best regards, Liviu > > > + device_type = "pci"; > > + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ > > + bus-range = <0 255>; > > + linux,pci-domain = <0>; > > + #address-cells = <3>; > > + #size-cells = <2>; > > + dma-coherent; > > + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000 > > + 0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000 > > + 0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; > > + #interrupt-cells = <1>; > > + interrupt-map-mask = <0 0 0 7>; > > + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4 > > + 0 0 0 2 &gic 0 0 0 137 4 > > + 0 0 0 3 &gic 0 0 0 138 4 > > + 0 0 0 4 &gic 0 0 0 139 4>; > > + msi-parent = <&v2m_0>; > > + }; > > }; > > > > &memtimer { > > -- > > 2.6.0 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe devicetree" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
