[PATCH 0/4] arm64: Juno: Add support for PCIe on R1 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Juno R1 board has a working PCIe host bridge that can be enabled and
configured by the firmware and made use of by Linux. For UEFI, the
Linaro releases contain firmware that configure the XpressRICH3 host
bridge correctly. For U-Boot based setups, one needs the patchset
posted here[1].

This patchset adds a quirk for setting the correct class to the host
bridge device and the device tree changes that enable PCIe on Juno R1.
We also update the defconfig to enable the generic PCI host bridge driver.

Best regards,
Liviu

1. http://lists.denx.de/pipermail/u-boot/2015-October/229669.html


Andrew Murray (1):
  pci: Add PLDA's XpressRICH3 PCIe host bridge PCI ID

Liviu Dudau (3):
  PCI: Add quirk for PLDA's XpressRICH3 host bridge class.
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  arm64: defconfig: Enable PCI generic host bridge by default

 arch/arm64/boot/dts/arm/juno-r1.dts | 20 ++++++++++++++++++++
 arch/arm64/configs/defconfig        |  1 +
 drivers/pci/quirks.c                | 10 ++++++++++
 include/linux/pci_ids.h             |  3 +++
 4 files changed, 34 insertions(+)

-- 
2.6.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux