[PATCH v4] clk: bcm2835: Add support for programming the audio domain clocks.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This adds support for enabling, disabling, and setting the rate of the
audio domain clocks.  It will be necessary for setting the pixel clock
for HDMI in the VC4 driver and let us write a cpufreq driver.  It will
also improve compatibility with user changes to the firmware's
config.txt, since our previous fixed clocks are unaware of it.

The firmware also has support for configuring the clocks through the
mailbox channel, but the pixel clock setup by the firmware doesn't
work, and it's Raspberry Pi specific anyway.  The only conflicts we
should have with the firmware would be if we made firmware calls that
result in clock management (like opening firmware V3D or ISP access,
which we don't support in upstream), or on hardware over-thermal or
under-voltage (when the firmware would rewrite PLLB to take the ARM
out of overclock).  If that happens, our cached .recalc_rate() results
would be incorrect, but that's no worse than our current state where
we used fixed clocks.

The existing fixed clocks in the code are left in place to provide
backwards compatibility with old device tree files.

Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
Tested-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
---

This is the remaining driver patch to go on the clock tree's
clk-bcm2385 (oops, spelling :) ) tree for the bcm2835 driver.

v2: Fix onecell->clks[] allocation size.
v3: '/*' on otherwise-empty line for multiline comments, fix top
    comment, use more named initializers, do fewer separate
    allocations on probe, unwind allocations on failure in probe (from
    review by Stephen Warren).  Use new clk_hw_get_name().  Switch
    fb_prediv_bit to be fb_prediv_mask to avoid typing BIT() so many
    times.
v4: Incorporate feedback from Stephen Boyd, and use devm_kasprintf instead
    of bare kasprintf in driver init.

 drivers/clk/bcm/clk-bcm2835.c | 1509 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 1508 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index dd295e4..9498fd9 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2010,2015 Broadcom
  * Copyright (C) 2012 Stephen Warren
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,10 +17,272 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/**
+ * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
+ *
+ * The clock tree on the 2835 has several levels.  There's a root
+ * oscillator running at 19.2Mhz.  After the oscillator there are 5
+ * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
+ * and "HDMI displays".  Those 5 PLLs each can divide their output to
+ * produce up to 4 channels.  Finally, there is the level of clocks to
+ * be consumed by other hardware components (like "H264" or "HDMI
+ * state machine"), which divide off of some subset of the PLL
+ * channels.
+ *
+ * All of the clocks in the tree are exposed in the DT, because the DT
+ * may want to make assignments of the final layer of clocks to the
+ * PLL channels, and some components of the hardware will actually
+ * skip layers of the tree (for example, the pixel clock comes
+ * directly from the PLLH PIX channel without using a CM_*CTL clock
+ * generator).
+ */
+
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/clk/bcm2835.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/bcm2835.h>
+
+#define CM_PASSWORD		0x5a000000
+
+#define CM_GNRICCTL		0x000
+#define CM_GNRICDIV		0x004
+# define CM_DIV_FRAC_BITS	12
+
+#define CM_VPUCTL		0x008
+#define CM_VPUDIV		0x00c
+#define CM_SYSCTL		0x010
+#define CM_SYSDIV		0x014
+#define CM_PERIACTL		0x018
+#define CM_PERIADIV		0x01c
+#define CM_PERIICTL		0x020
+#define CM_PERIIDIV		0x024
+#define CM_H264CTL		0x028
+#define CM_H264DIV		0x02c
+#define CM_ISPCTL		0x030
+#define CM_ISPDIV		0x034
+#define CM_V3DCTL		0x038
+#define CM_V3DDIV		0x03c
+#define CM_CAM0CTL		0x040
+#define CM_CAM0DIV		0x044
+#define CM_CAM1CTL		0x048
+#define CM_CAM1DIV		0x04c
+#define CM_CCP2CTL		0x050
+#define CM_CCP2DIV		0x054
+#define CM_DSI0ECTL		0x058
+#define CM_DSI0EDIV		0x05c
+#define CM_DSI0PCTL		0x060
+#define CM_DSI0PDIV		0x064
+#define CM_DPICTL		0x068
+#define CM_DPIDIV		0x06c
+#define CM_GP0CTL		0x070
+#define CM_GP0DIV		0x074
+#define CM_GP1CTL		0x078
+#define CM_GP1DIV		0x07c
+#define CM_GP2CTL		0x080
+#define CM_GP2DIV		0x084
+#define CM_HSMCTL		0x088
+#define CM_HSMDIV		0x08c
+#define CM_OTPCTL		0x090
+#define CM_OTPDIV		0x094
+#define CM_PWMCTL		0x0a0
+#define CM_PWMDIV		0x0a4
+#define CM_SMICTL		0x0b0
+#define CM_SMIDIV		0x0b4
+#define CM_TSENSCTL		0x0e0
+#define CM_TSENSDIV		0x0e4
+#define CM_TIMERCTL		0x0e8
+#define CM_TIMERDIV		0x0ec
+#define CM_UARTCTL		0x0f0
+#define CM_UARTDIV		0x0f4
+#define CM_VECCTL		0x0f8
+#define CM_VECDIV		0x0fc
+#define CM_PULSECTL		0x190
+#define CM_PULSEDIV		0x194
+#define CM_SDCCTL		0x1a8
+#define CM_SDCDIV		0x1ac
+#define CM_ARMCTL		0x1b0
+#define CM_EMMCCTL		0x1c0
+#define CM_EMMCDIV		0x1c4
+
+/* General bits for the CM_*CTL regs */
+# define CM_ENABLE			BIT(4)
+# define CM_KILL			BIT(5)
+# define CM_GATE_BIT			6
+# define CM_GATE			BIT(CM_GATE_BIT)
+# define CM_BUSY			BIT(7)
+# define CM_BUSYD			BIT(8)
+# define CM_SRC_SHIFT			0
+# define CM_SRC_BITS			4
+# define CM_SRC_MASK			0xf
+# define CM_SRC_GND			0
+# define CM_SRC_OSC			1
+# define CM_SRC_TESTDEBUG0		2
+# define CM_SRC_TESTDEBUG1		3
+# define CM_SRC_PLLA_CORE		4
+# define CM_SRC_PLLA_PER		4
+# define CM_SRC_PLLC_CORE0		5
+# define CM_SRC_PLLC_PER		5
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLD_CORE		6
+# define CM_SRC_PLLD_PER		6
+# define CM_SRC_PLLH_AUX		7
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLC_CORE2		9
+
+#define CM_OSCCOUNT		0x100
+
+#define CM_PLLA			0x104
+# define CM_PLL_ANARST			BIT(8)
+# define CM_PLLA_HOLDPER		BIT(7)
+# define CM_PLLA_LOADPER		BIT(6)
+# define CM_PLLA_HOLDCORE		BIT(5)
+# define CM_PLLA_LOADCORE		BIT(4)
+# define CM_PLLA_HOLDCCP2		BIT(3)
+# define CM_PLLA_LOADCCP2		BIT(2)
+# define CM_PLLA_HOLDDSI0		BIT(1)
+# define CM_PLLA_LOADDSI0		BIT(0)
+
+#define CM_PLLC			0x108
+# define CM_PLLC_HOLDPER		BIT(7)
+# define CM_PLLC_LOADPER		BIT(6)
+# define CM_PLLC_HOLDCORE2		BIT(5)
+# define CM_PLLC_LOADCORE2		BIT(4)
+# define CM_PLLC_HOLDCORE1		BIT(3)
+# define CM_PLLC_LOADCORE1		BIT(2)
+# define CM_PLLC_HOLDCORE0		BIT(1)
+# define CM_PLLC_LOADCORE0		BIT(0)
+
+#define CM_PLLD			0x10c
+# define CM_PLLD_HOLDPER		BIT(7)
+# define CM_PLLD_LOADPER		BIT(6)
+# define CM_PLLD_HOLDCORE		BIT(5)
+# define CM_PLLD_LOADCORE		BIT(4)
+# define CM_PLLD_HOLDDSI1		BIT(3)
+# define CM_PLLD_LOADDSI1		BIT(2)
+# define CM_PLLD_HOLDDSI0		BIT(1)
+# define CM_PLLD_LOADDSI0		BIT(0)
+
+#define CM_PLLH			0x110
+# define CM_PLLH_LOADRCAL		BIT(2)
+# define CM_PLLH_LOADAUX		BIT(1)
+# define CM_PLLH_LOADPIX		BIT(0)
+
+#define CM_LOCK			0x114
+# define CM_LOCK_FLOCKH			BIT(12)
+# define CM_LOCK_FLOCKD			BIT(11)
+# define CM_LOCK_FLOCKC			BIT(10)
+# define CM_LOCK_FLOCKB			BIT(9)
+# define CM_LOCK_FLOCKA			BIT(8)
+
+#define CM_EVENT		0x118
+#define CM_DSI1ECTL		0x158
+#define CM_DSI1EDIV		0x15c
+#define CM_DSI1PCTL		0x160
+#define CM_DSI1PDIV		0x164
+#define CM_DFTCTL		0x168
+#define CM_DFTDIV		0x16c
+
+#define CM_PLLB			0x170
+# define CM_PLLB_HOLDARM		BIT(1)
+# define CM_PLLB_LOADARM		BIT(0)
+
+#define A2W_PLLA_CTRL		0x1100
+#define A2W_PLLC_CTRL		0x1120
+#define A2W_PLLD_CTRL		0x1140
+#define A2W_PLLH_CTRL		0x1160
+#define A2W_PLLB_CTRL		0x11e0
+# define A2W_PLL_CTRL_PRST_DISABLE	BIT(17)
+# define A2W_PLL_CTRL_PWRDN		BIT(16)
+# define A2W_PLL_CTRL_PDIV_MASK		0x000007000
+# define A2W_PLL_CTRL_PDIV_SHIFT	12
+# define A2W_PLL_CTRL_NDIV_MASK		0x0000003ff
+# define A2W_PLL_CTRL_NDIV_SHIFT	0
+
+#define A2W_PLLA_ANA0		0x1010
+#define A2W_PLLC_ANA0		0x1030
+#define A2W_PLLD_ANA0		0x1050
+#define A2W_PLLH_ANA0		0x1070
+#define A2W_PLLB_ANA0		0x10f0
+
+#define A2W_XOSC_CTRL		0x1190
+# define A2W_XOSC_CTRL_PLLB_ENABLE	BIT(7)
+# define A2W_XOSC_CTRL_PLLA_ENABLE	BIT(6)
+# define A2W_XOSC_CTRL_PLLD_ENABLE	BIT(5)
+# define A2W_XOSC_CTRL_DDR_ENABLE	BIT(4)
+# define A2W_XOSC_CTRL_CPR1_ENABLE	BIT(3)
+# define A2W_XOSC_CTRL_USB_ENABLE	BIT(2)
+# define A2W_XOSC_CTRL_HDMI_ENABLE	BIT(1)
+# define A2W_XOSC_CTRL_PLLC_ENABLE	BIT(0)
+
+#define A2W_PLLA_FRAC		0x1200
+#define A2W_PLLC_FRAC		0x1220
+#define A2W_PLLD_FRAC		0x1240
+#define A2W_PLLH_FRAC		0x1260
+#define A2W_PLLB_FRAC		0x12e0
+# define A2W_PLL_FRAC_MASK		((1 << A2W_PLL_FRAC_BITS) - 1)
+# define A2W_PLL_FRAC_BITS		20
+
+#define A2W_PLL_CHANNEL_DISABLE		BIT(8)
+#define A2W_PLL_DIV_BITS		8
+#define A2W_PLL_DIV_SHIFT		0
+
+#define A2W_PLLA_DSI0		0x1300
+#define A2W_PLLA_CORE		0x1400
+#define A2W_PLLA_PER		0x1500
+#define A2W_PLLA_CCP2		0x1600
+
+#define A2W_PLLC_CORE2		0x1320
+#define A2W_PLLC_CORE1		0x1420
+#define A2W_PLLC_PER		0x1520
+#define A2W_PLLC_CORE0		0x1620
+
+#define A2W_PLLD_DSI0		0x1340
+#define A2W_PLLD_CORE		0x1440
+#define A2W_PLLD_PER		0x1540
+#define A2W_PLLD_DSI1		0x1640
+
+#define A2W_PLLH_AUX		0x1360
+#define A2W_PLLH_RCAL		0x1460
+#define A2W_PLLH_PIX		0x1560
+#define A2W_PLLH_STS		0x1660
+
+#define A2W_PLLH_CTRLR		0x1960
+#define A2W_PLLH_FRACR		0x1a60
+#define A2W_PLLH_AUXR		0x1b60
+#define A2W_PLLH_RCALR		0x1c60
+#define A2W_PLLH_PIXR		0x1d60
+#define A2W_PLLH_STSR		0x1e60
+
+#define A2W_PLLB_ARM		0x13e0
+#define A2W_PLLB_SP0		0x14e0
+#define A2W_PLLB_SP1		0x15e0
+#define A2W_PLLB_SP2		0x16e0
+
+#define LOCK_TIMEOUT_MS		100
+
+struct bcm2835_cprman {
+	struct device *dev;
+	void __iomem *regs;
+	spinlock_t regs_lock;
+	const char *osc_name;
+
+	struct clk_onecell_data onecell;
+	struct clk *clks[BCM2835_CLOCK_COUNT];
+};
+
+static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
+{
+	writel(CM_PASSWORD | val, cprman->regs + reg);
+}
+
+static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
+{
+	return readl(cprman->regs + reg);
+}
 
 /*
  * These are fixed clocks. They're probably not all root clocks and it may
@@ -53,3 +315,1248 @@ void __init bcm2835_init_clocks(void)
 	if (ret)
 		pr_err("uart1_pclk alias not registered\n");
 }
+
+struct bcm2835_pll_data {
+	const char *name;
+	u32 cm_ctrl_reg;
+	u32 a2w_ctrl_reg;
+	u32 frac_reg;
+	u32 ana_reg_base;
+	u32 reference_enable_mask;
+	/* Bit in CM_LOCK to indicate when the PLL has locked. */
+	u32 lock_mask;
+
+	const struct bcm2835_pll_ana_bits *ana;
+
+	unsigned long min_rate;
+	unsigned long max_rate;
+	/*
+	 * Highest rate for the VCO before we have to use the
+	 * pre-divide-by-2.
+	 */
+	unsigned long max_fb_rate;
+};
+
+struct bcm2835_pll_ana_bits {
+	u32 mask0;
+	u32 set0;
+	u32 mask1;
+	u32 set1;
+	u32 mask3;
+	u32 set3;
+	u32 fb_prediv_mask;
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
+	.mask0 = 0,
+	.set0 = 0,
+	.mask1 = ~((7 << 19) | (15 << 15)),
+	.set1 = (2 << 19) | (8 << 15),
+	.mask3 = ~(7 << 7),
+	.set3 = (6 << 1),
+	.fb_prediv_mask = BIT(14),
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
+	.mask0 = ~((7 << 19) | (3 << 22)),
+	.set0 = (2 << 19) | (2 << 22),
+	.mask1 = ~((1 << 0) | (15 << 1)),
+	.set1 = (6 << 1),
+	.mask3 = 0,
+	.set3 = 0,
+	.fb_prediv_mask = BIT(11),
+};
+
+/*
+ * PLLA is the auxiliary PLL, used to drive the CCP2 (Compact Camera
+ * Port 2) transmitter clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plla_data = {
+	.name = "plla",
+	.cm_ctrl_reg = CM_PLLA,
+	.a2w_ctrl_reg = A2W_PLLA_CTRL,
+	.frac_reg = A2W_PLLA_FRAC,
+	.ana_reg_base = A2W_PLLA_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKA,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 2400000000u,
+	.max_fb_rate = 1750000000u,
+};
+
+/* PLLB is used for the ARM's clock. */
+static const struct bcm2835_pll_data bcm2835_pllb_data = {
+	.name = "pllb",
+	.cm_ctrl_reg = CM_PLLB,
+	.a2w_ctrl_reg = A2W_PLLB_CTRL,
+	.frac_reg = A2W_PLLB_FRAC,
+	.ana_reg_base = A2W_PLLB_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKB,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 3000000000u,
+	.max_fb_rate = 1750000000u,
+};
+
+/*
+ * PLLC is the core PLL, used to drive the core VPU clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+*/
+static const struct bcm2835_pll_data bcm2835_pllc_data = {
+	.name = "pllc",
+	.cm_ctrl_reg = CM_PLLC,
+	.a2w_ctrl_reg = A2W_PLLC_CTRL,
+	.frac_reg = A2W_PLLC_FRAC,
+	.ana_reg_base = A2W_PLLC_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKC,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 3000000000u,
+	.max_fb_rate = 1750000000u,
+};
+
+/*
+ * PLLD is the display PLL, used to drive DSI display panels.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plld_data = {
+	.name = "plld",
+	.cm_ctrl_reg = CM_PLLD,
+	.a2w_ctrl_reg = A2W_PLLD_CTRL,
+	.frac_reg = A2W_PLLD_FRAC,
+	.ana_reg_base = A2W_PLLD_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKD,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 2400000000u,
+	.max_fb_rate = 1750000000u,
+};
+
+/*
+ * PLLH is used to supply the pixel clock or the AUX clock for the TV
+ * encoder.
+ *
+ * It is in the HDMI power domain.
+ */
+static const struct bcm2835_pll_data bcm2835_pllh_data = {
+	"pllh",
+	.cm_ctrl_reg = CM_PLLH,
+	.a2w_ctrl_reg = A2W_PLLH_CTRL,
+	.frac_reg = A2W_PLLH_FRAC,
+	.ana_reg_base = A2W_PLLH_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKH,
+
+	.ana = &bcm2835_ana_pllh,
+
+	.min_rate = 600000000u,
+	.max_rate = 3000000000u,
+	.max_fb_rate = 1750000000u,
+};
+
+struct bcm2835_pll_divider_data {
+	const char *name;
+	const struct bcm2835_pll_data *source_pll;
+	u32 cm_reg;
+	u32 a2w_reg;
+
+	u32 load_mask;
+	u32 hold_mask;
+	u32 fixed_divider;
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_core_data = {
+	.name = "plla_core",
+	.source_pll = &bcm2835_plla_data,
+	.cm_reg = CM_PLLA,
+	.a2w_reg = A2W_PLLA_CORE,
+	.load_mask = CM_PLLA_LOADCORE,
+	.hold_mask = CM_PLLA_HOLDCORE,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_per_data = {
+	.name = "plla_per",
+	.source_pll = &bcm2835_plla_data,
+	.cm_reg = CM_PLLA,
+	.a2w_reg = A2W_PLLA_PER,
+	.load_mask = CM_PLLA_LOADPER,
+	.hold_mask = CM_PLLA_HOLDPER,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllb_arm_data = {
+	.name = "pllb_arm",
+	.source_pll = &bcm2835_pllb_data,
+	.cm_reg = CM_PLLB,
+	.a2w_reg = A2W_PLLB_ARM,
+	.load_mask = CM_PLLB_LOADARM,
+	.hold_mask = CM_PLLB_HOLDARM,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core0_data = {
+	.name = "pllc_core0",
+	.source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC,
+	.a2w_reg = A2W_PLLC_CORE0,
+	.load_mask = CM_PLLC_LOADCORE0,
+	.hold_mask = CM_PLLC_HOLDCORE0,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core1_data = {
+	.name = "pllc_core1", .source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC, A2W_PLLC_CORE1,
+	.load_mask = CM_PLLC_LOADCORE1,
+	.hold_mask = CM_PLLC_HOLDCORE1,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core2_data = {
+	.name = "pllc_core2",
+	.source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC,
+	.a2w_reg = A2W_PLLC_CORE2,
+	.load_mask = CM_PLLC_LOADCORE2,
+	.hold_mask = CM_PLLC_HOLDCORE2,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_per_data = {
+	.name = "pllc_per",
+	.source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC,
+	.a2w_reg = A2W_PLLC_PER,
+	.load_mask = CM_PLLC_LOADPER,
+	.hold_mask = CM_PLLC_HOLDPER,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_core_data = {
+	.name = "plld_core",
+	.source_pll = &bcm2835_plld_data,
+	.cm_reg = CM_PLLD,
+	.a2w_reg = A2W_PLLD_CORE,
+	.load_mask = CM_PLLD_LOADCORE,
+	.hold_mask = CM_PLLD_HOLDCORE,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_per_data = {
+	.name = "plld_per",
+	.source_pll = &bcm2835_plld_data,
+	.cm_reg = CM_PLLD,
+	.a2w_reg = A2W_PLLD_PER,
+	.load_mask = CM_PLLD_LOADPER,
+	.hold_mask = CM_PLLD_HOLDPER,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_rcal_data = {
+	.name = "pllh_rcal",
+	.source_pll = &bcm2835_pllh_data,
+	.cm_reg = CM_PLLH,
+	.a2w_reg = A2W_PLLH_RCAL,
+	.load_mask = CM_PLLH_LOADRCAL,
+	.hold_mask = 0,
+	.fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_aux_data = {
+	.name = "pllh_aux",
+	.source_pll = &bcm2835_pllh_data,
+	.cm_reg = CM_PLLH,
+	.a2w_reg = A2W_PLLH_AUX,
+	.load_mask = CM_PLLH_LOADAUX,
+	.hold_mask = 0,
+	.fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_pix_data = {
+	.name = "pllh_pix",
+	.source_pll = &bcm2835_pllh_data,
+	.cm_reg = CM_PLLH,
+	.a2w_reg = A2W_PLLH_PIX,
+	.load_mask = CM_PLLH_LOADPIX,
+	.hold_mask = 0,
+	.fixed_divider = 10,
+};
+
+struct bcm2835_clock_data {
+	const char *name;
+
+	const char *const *parents;
+	int num_mux_parents;
+
+	u32 ctl_reg;
+	u32 div_reg;
+
+	/* Number of integer bits in the divider */
+	u32 int_bits;
+	/* Number of fractional bits in the divider */
+	u32 frac_bits;
+
+	bool is_vpu_clock;
+};
+
+static const char *const bcm2835_clock_per_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_per",
+	"pllc_per",
+	"plld_per",
+	"pllh_aux",
+};
+
+static const char *const bcm2835_clock_vpu_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_core",
+	"pllc_core0",
+	"plld_core",
+	"pllh_aux",
+	"pllc_core1",
+	"pllc_core2",
+};
+
+static const char *const bcm2835_clock_osc_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1"
+};
+
+/*
+ * Used for a 1Mhz clock for the system clocksource, and also used by
+ * the watchdog timer and the camera pulse generator.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_timer_data = {
+	.name = "timer",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+	.parents = bcm2835_clock_osc_parents,
+	.ctl_reg = CM_TIMERCTL,
+	.div_reg = CM_TIMERDIV,
+	.int_bits = 6,
+	.frac_bits = 12,
+};
+
+/* One Time Programmable Memory clock.  Maximum 10Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_otp_data = {
+	.name = "otp",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+	.parents = bcm2835_clock_osc_parents,
+	.ctl_reg = CM_OTPCTL,
+	.div_reg = CM_OTPDIV,
+	.int_bits = 4,
+	.frac_bits = 0,
+};
+
+/*
+ * VPU clock.  This doesn't have an enable bit, since it drives the
+ * bus for everything else, and is special so it doesn't need to be
+ * gated for rate changes.  It is also known as "clk_audio" in various
+ * hardware documentation.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_vpu_data = {
+	.name = "vpu",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_VPUCTL,
+	.div_reg = CM_VPUDIV,
+	.int_bits = 12,
+	.frac_bits = 8,
+	.is_vpu_clock = true,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_v3d_data = {
+	.name = "v3d",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_V3DCTL,
+	.div_reg = CM_V3DDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_isp_data = {
+	.name = "isp",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_ISPCTL,
+	.div_reg = CM_ISPDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_h264_data = {
+	.name = "h264",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_H264CTL,
+	.div_reg = CM_H264DIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+/* TV encoder clock.  Only operating frequency is 108Mhz.  */
+static const struct bcm2835_clock_data bcm2835_clock_vec_data = {
+	.name = "vec",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_VECCTL,
+	.div_reg = CM_VECDIV,
+	.int_bits = 4,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_uart_data = {
+	.name = "uart",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_UARTCTL,
+	.div_reg = CM_UARTDIV,
+	.int_bits = 10,
+	.frac_bits = 12,
+};
+
+/* HDMI state machine */
+static const struct bcm2835_clock_data bcm2835_clock_hsm_data = {
+	.name = "hsm",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_HSMCTL,
+	.div_reg = CM_HSMDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+/*
+ * Secondary SDRAM clock.  Used for low-voltage modes when the PLL in
+ * the SDRAM controller can't be used.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_sdram_data = {
+	.name = "sdram",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_SDCCTL,
+	.div_reg = CM_SDCDIV,
+	.int_bits = 6,
+	.frac_bits = 0,
+};
+
+/* Clock for the temperature sensor.  Generally run at 2Mhz, max 5Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_tsens_data = {
+	.name = "tsens",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+	.parents = bcm2835_clock_osc_parents,
+	.ctl_reg = CM_TSENSCTL,
+	.div_reg = CM_TSENSDIV,
+	.int_bits = 5,
+	.frac_bits = 0,
+};
+
+/* Arasan EMMC clock */
+static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
+	.name = "emmc",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_EMMCCTL,
+	.div_reg = CM_EMMCDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+struct bcm2835_pll {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_data *data;
+};
+
+static int bcm2835_pll_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	return cprman_read(cprman, data->a2w_ctrl_reg) &
+		A2W_PLL_CTRL_PRST_DISABLE;
+}
+
+static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
+					     unsigned long parent_rate,
+					     u32 *ndiv, u32 *fdiv)
+{
+	u64 div;
+
+	div = ((u64)rate << A2W_PLL_FRAC_BITS);
+	do_div(div, parent_rate);
+
+	*ndiv = div >> A2W_PLL_FRAC_BITS;
+	*fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+}
+
+static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+					   u32 ndiv, u32 fdiv, u32 pdiv)
+{
+	u64 rate;
+
+	if (pdiv == 0)
+		return 0;
+
+	rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
+	do_div(rate, pdiv);
+	return rate >> A2W_PLL_FRAC_BITS;
+}
+
+static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	u32 ndiv, fdiv;
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+
+	return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+}
+
+static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
+	u32 ndiv, pdiv, fdiv;
+	bool using_prediv;
+
+	if (parent_rate == 0)
+		return 0;
+
+	fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
+	ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
+	pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
+	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
+		data->ana->fb_prediv_mask;
+
+	if (using_prediv)
+		ndiv *= 2;
+
+	return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
+}
+
+static void bcm2835_pll_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
+	cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
+}
+
+static int bcm2835_pll_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	ktime_t start;
+
+	/* Take the PLL out of reset. */
+	cprman_write(cprman, data->cm_ctrl_reg,
+		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+
+	/* Wait for the PLL to lock. */
+	start = ktime_get();
+	while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
+		ktime_t delta = ktime_sub(ktime_get(), start);
+
+		if (ktime_to_ms(delta) > LOCK_TIMEOUT_MS) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(hw));
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static void
+bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
+{
+	int i;
+
+	/*
+	 * ANA register setup is done as a series of writes to
+	 * ANA3-ANA0, in that order.  This lets us write all 4
+	 * registers as a single cycle of the serdes interface (taking
+	 * 100 xosc clocks), whereas if we were to update ana0, 1, and
+	 * 3 individually through their partial-write registers, each
+	 * would be their own serdes cycle.
+	 */
+	for (i = 3; i >= 0; i--)
+		cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
+}
+
+static int bcm2835_pll_set_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
+	u32 ndiv, fdiv, pdiv = 1, a2w_ctl;
+	u32 ana[4];
+	int i;
+
+	if (rate < data->min_rate || rate > data->max_rate) {
+		dev_err(cprman->dev, "%s: rate out of spec: %ld vs (%ld, %ld)\n",
+			clk_hw_get_name(hw), rate,
+			data->min_rate, data->max_rate);
+		return -EINVAL;
+	}
+
+	if (rate > data->max_fb_rate) {
+		use_fb_prediv = true;
+		rate /= 2;
+	} else {
+		use_fb_prediv = false;
+	}
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);
+
+	for (i = 3; i >= 0; i--)
+		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
+
+	was_using_prediv = ana[1] & data->ana->fb_prediv_mask;
+
+	ana[0] &= ~data->ana->mask0;
+	ana[0] |= data->ana->set0;
+	ana[1] &= ~data->ana->mask1;
+	ana[1] |= data->ana->set1;
+	ana[3] &= ~data->ana->mask3;
+	ana[3] |= data->ana->set3;
+
+	if (was_using_prediv && !use_fb_prediv) {
+		ana[1] &= ~data->ana->fb_prediv_mask;
+		do_ana_setup_first = true;
+	} else if (!was_using_prediv && use_fb_prediv) {
+		ana[1] |= data->ana->fb_prediv_mask;
+		do_ana_setup_first = false;
+	} else {
+		do_ana_setup_first = true;
+	}
+
+	/* Unmask the reference clock from the oscillator. */
+	cprman_write(cprman, A2W_XOSC_CTRL,
+		     cprman_read(cprman, A2W_XOSC_CTRL) |
+		     data->reference_enable_mask);
+
+	if (do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	/* Set the PLL multiplier from the oscillator. */
+	cprman_write(cprman, data->frac_reg, fdiv);
+
+	a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
+	a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
+	a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
+	a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
+	a2w_ctl |= pdiv << A2W_PLL_CTRL_PDIV_SHIFT;
+	cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);
+
+	if (!do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	bcm2835_pll_get_rate(&pll->hw, parent_rate);
+
+	return 0;
+}
+
+static const struct clk_ops bcm2835_pll_clk_ops = {
+	.is_prepared = bcm2835_pll_is_on,
+	.prepare = bcm2835_pll_on,
+	.unprepare = bcm2835_pll_off,
+	.recalc_rate = bcm2835_pll_get_rate,
+	.set_rate = bcm2835_pll_set_rate,
+	.round_rate = bcm2835_pll_round_rate,
+};
+
+struct bcm2835_pll_divider {
+	struct clk_divider div;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_divider_data *data;
+};
+
+static struct bcm2835_pll_divider *
+bcm2835_pll_divider_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_pll_divider, div.hw);
+}
+
+static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
+}
+
+static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long *parent_rate)
+{
+	return clk_divider_ops.round_rate(hw, rate, parent_rate);
+}
+
+static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	u32 div = cprman_read(cprman, data->a2w_reg);
+
+	div &= (1 << A2W_PLL_DIV_BITS) - 1;
+	if (div == 0)
+		div = 256;
+
+	return parent_rate / div;
+}
+
+static void bcm2835_pll_divider_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	cprman_write(cprman, data->cm_reg,
+		     (cprman_read(cprman, data->cm_reg) &
+		      ~data->load_mask) | data->hold_mask);
+	cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
+}
+
+static int bcm2835_pll_divider_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	cprman_write(cprman, data->a2w_reg,
+		     cprman_read(cprman, data->a2w_reg) &
+		     ~A2W_PLL_CHANNEL_DISABLE);
+
+	cprman_write(cprman, data->cm_reg,
+		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+
+	return 0;
+}
+
+static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
+					unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	u32 cm;
+
+	clk_divider_ops.set_rate(hw, rate, parent_rate);
+
+	cm = cprman_read(cprman, data->cm_reg);
+	cprman_write(cprman, data->cm_reg, cm | data->load_mask);
+	cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
+
+	return 0;
+}
+
+static const struct clk_ops bcm2835_pll_divider_clk_ops = {
+	.is_prepared = bcm2835_pll_divider_is_on,
+	.prepare = bcm2835_pll_divider_on,
+	.unprepare = bcm2835_pll_divider_off,
+	.recalc_rate = bcm2835_pll_divider_get_rate,
+	.set_rate = bcm2835_pll_divider_set_rate,
+	.round_rate = bcm2835_pll_divider_round_rate,
+};
+
+/*
+ * The CM dividers do fixed-point division, so we can't use the
+ * generic integer divider code like the PLL dividers do (and we can't
+ * fake it by having some fixed shifts preceding it in the clock tree,
+ * because we'd run out of bits in a 32-bit unsigned long).
+ */
+struct bcm2835_clock {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_clock_data *data;
+};
+
+static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_clock, hw);
+}
+
+static int bcm2835_clock_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
+}
+
+static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 unused_frac_mask = GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0);
+	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
+	u32 div;
+
+	do_div(temp, rate);
+	div = temp;
+
+	/* Round and mask off the unused bits */
+	if (unused_frac_mask != 0) {
+		div += unused_frac_mask >> 1;
+		div &= ~unused_frac_mask;
+	}
+
+	/* Clamp to the limits. */
+	div = max(div, unused_frac_mask + 1);
+	div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+				      CM_DIV_FRAC_BITS - data->frac_bits));
+
+	return div;
+}
+
+static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+					    unsigned long parent_rate,
+					    u32 div)
+{
+	const struct bcm2835_clock_data *data = clock->data;
+	u64 temp;
+
+	/*
+	 * The divisor is a 12.12 fixed point field, but only some of
+	 * the bits are populated in any given clock.
+	 */
+	div >>= CM_DIV_FRAC_BITS - data->frac_bits;
+	div &= (1 << (data->int_bits + data->frac_bits)) - 1;
+
+	if (div == 0)
+		return 0;
+
+	temp = (u64)parent_rate << data->frac_bits;
+
+	do_div(temp, div);
+
+	return temp;
+}
+
+static long bcm2835_clock_round_rate(struct clk_hw *hw,
+				     unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	u32 div = bcm2835_clock_choose_div(hw, rate, *parent_rate);
+
+	return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div);
+}
+
+static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div = cprman_read(cprman, data->div_reg);
+
+	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+}
+
+static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
+{
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	ktime_t start = ktime_get();
+
+	while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
+		ktime_t delta = ktime_sub(ktime_get(), start);
+
+		if (ktime_to_ms(delta) > LOCK_TIMEOUT_MS) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(&clock->hw));
+			return;
+		}
+		cpu_relax();
+	}
+}
+
+static void bcm2835_clock_off(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
+	spin_unlock(&cprman->regs_lock);
+
+	/* BUSY will remain high until the divider completes its cycle. */
+	bcm2835_clock_wait_busy(clock);
+}
+
+static int bcm2835_clock_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) |
+		     CM_ENABLE |
+		     CM_GATE);
+	spin_unlock(&cprman->regs_lock);
+
+	return 0;
+}
+
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
+
+	cprman_write(cprman, data->div_reg, div);
+
+	return 0;
+}
+
+static const struct clk_ops bcm2835_clock_clk_ops = {
+	.is_prepared = bcm2835_clock_is_on,
+	.prepare = bcm2835_clock_on,
+	.unprepare = bcm2835_clock_off,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.round_rate = bcm2835_clock_round_rate,
+};
+
+static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
+{
+	return true;
+}
+
+/*
+ * The VPU clock can never be disabled (it doesn't have an ENABLE
+ * bit), so it gets its own set of clock ops.
+ */
+static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
+	.is_prepared = bcm2835_vpu_clock_is_on,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.round_rate = bcm2835_clock_round_rate,
+};
+
+static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+					const struct bcm2835_pll_data *data)
+{
+	struct bcm2835_pll *pll;
+	struct clk_init_data init;
+
+	memset(&init, 0, sizeof(init));
+
+	/* All of the PLLs derive from the external oscillator. */
+	init.parent_names = &cprman->osc_name;
+	init.num_parents = 1;
+	init.name = data->name;
+	init.ops = &bcm2835_pll_clk_ops;
+	init.flags = CLK_IGNORE_UNUSED;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return NULL;
+
+	pll->cprman = cprman;
+	pll->data = data;
+	pll->hw.init = &init;
+
+	return clk_register(cprman->dev, &pll->hw);
+}
+
+static struct clk *
+bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
+			     const struct bcm2835_pll_divider_data *data)
+{
+	struct bcm2835_pll_divider *divider;
+	struct clk_init_data init;
+	struct clk *clk;
+	const char *divider_name;
+
+	if (data->fixed_divider != 1) {
+		divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
+					      "%s_prediv", data->name);
+		if (!divider_name)
+			return NULL;
+	} else {
+		divider_name = data->name;
+	}
+
+	memset(&init, 0, sizeof(init));
+
+	init.parent_names = &data->source_pll->name;
+	init.num_parents = 1;
+	init.name = divider_name;
+	init.ops = &bcm2835_pll_divider_clk_ops;
+	init.flags = (CLK_SET_RATE_PARENT |
+		      CLK_IGNORE_UNUSED);
+
+	divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+	if (!divider)
+		return NULL;
+
+	divider->div.reg = cprman->regs + data->a2w_reg;
+	divider->div.shift = A2W_PLL_DIV_SHIFT;
+	divider->div.width = A2W_PLL_DIV_BITS;
+	divider->div.flags = 0;
+	divider->div.lock = &cprman->regs_lock;
+	divider->div.hw.init = &init;
+	divider->div.table = NULL;
+
+	divider->cprman = cprman;
+	divider->data = data;
+
+	clk = clk_register(cprman->dev, &divider->div.hw);
+	if (IS_ERR(clk))
+		return clk;
+
+	/*
+	 * PLLH's channels have a fixed divide by 10 afterwards, which
+	 * is what our consumers are actually using.
+	 */
+	if (data->fixed_divider != 1) {
+		return clk_register_fixed_factor(cprman->dev, data->name,
+						 divider_name,
+						 CLK_SET_RATE_PARENT,
+						 1,
+						 data->fixed_divider);
+	}
+
+	return clk;
+}
+
+static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+					  const struct bcm2835_clock_data *data)
+{
+	struct bcm2835_clock *clock;
+	struct clk_init_data init;
+	const char *parent;
+
+	/*
+	 * Most of the clock generators have a mux field, so we
+	 * instantiate a generic mux as our parent to handle it.
+	 */
+	if (data->num_mux_parents) {
+		const char *parents[data->num_mux_parents];
+		int i;
+
+		parent = devm_kasprintf(cprman->dev, GFP_KERNEL,
+					"mux_%s", data->name);
+		if (!parent)
+			return NULL;
+
+		/*
+		 * Replace our "xosc" references with the oscillator's
+		 * actual name.
+		 */
+		for (i = 0; i < data->num_mux_parents; i++) {
+			if (strcmp(data->parents[i], "xosc") == 0)
+				parents[i] = cprman->osc_name;
+			else
+				parents[i] = data->parents[i];
+		}
+
+		clk_register_mux(cprman->dev, parent,
+				 parents, data->num_mux_parents,
+				 CLK_SET_RATE_PARENT,
+				 cprman->regs + data->ctl_reg,
+				 CM_SRC_SHIFT, CM_SRC_BITS,
+				 0, &cprman->regs_lock);
+	} else {
+		parent = data->parents[0];
+	}
+
+	memset(&init, 0, sizeof(init));
+	init.parent_names = &parent;
+	init.num_parents = 1;
+	init.name = data->name;
+	init.flags = CLK_IGNORE_UNUSED;
+
+	if (data->is_vpu_clock) {
+		init.ops = &bcm2835_vpu_clock_clk_ops;
+	} else {
+		init.ops = &bcm2835_clock_clk_ops;
+		init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+	}
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock)
+		return NULL;
+
+	clock->cprman = cprman;
+	clock->data = data;
+	clock->hw.init = &init;
+
+	return clk_register(cprman->dev, &clock->hw);
+}
+
+
+static int bcm2835_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk **clks;
+	struct bcm2835_cprman *cprman;
+
+	cprman = devm_kzalloc(dev, sizeof(*cprman), GFP_KERNEL);
+	if (!cprman)
+		return -ENOMEM;
+
+	spin_lock_init(&cprman->regs_lock);
+	cprman->dev = &pdev->dev;
+	cprman->regs = of_iomap(dev->of_node, 0);
+	if (!cprman->regs)
+		return -ENODEV;
+
+	cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0);
+	if (!cprman->osc_name) {
+		iounmap(cprman->regs);
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, cprman);
+
+	cprman->onecell.clk_num = BCM2835_CLOCK_COUNT;
+	cprman->onecell.clks = cprman->clks;
+	clks = cprman->clks;
+
+	clks[BCM2835_PLLA] = bcm2835_register_pll(cprman, &bcm2835_plla_data);
+	clks[BCM2835_PLLB] = bcm2835_register_pll(cprman, &bcm2835_pllb_data);
+	clks[BCM2835_PLLC] = bcm2835_register_pll(cprman, &bcm2835_pllc_data);
+	clks[BCM2835_PLLD] = bcm2835_register_pll(cprman, &bcm2835_plld_data);
+	clks[BCM2835_PLLH] = bcm2835_register_pll(cprman, &bcm2835_pllh_data);
+
+	clks[BCM2835_PLLA_CORE] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plla_core_data);
+	clks[BCM2835_PLLA_PER] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plla_per_data);
+	clks[BCM2835_PLLC_CORE0] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core0_data);
+	clks[BCM2835_PLLC_CORE1] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core1_data);
+	clks[BCM2835_PLLC_CORE2] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core2_data);
+	clks[BCM2835_PLLC_PER] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_per_data);
+	clks[BCM2835_PLLD_CORE] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plld_core_data);
+	clks[BCM2835_PLLD_PER] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plld_per_data);
+	clks[BCM2835_PLLH_RCAL] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllh_rcal_data);
+	clks[BCM2835_PLLH_AUX] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllh_aux_data);
+	clks[BCM2835_PLLH_PIX] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllh_pix_data);
+
+	clks[BCM2835_CLOCK_TIMER] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_timer_data);
+	clks[BCM2835_CLOCK_OTP] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_otp_data);
+	clks[BCM2835_CLOCK_TSENS] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_tsens_data);
+	clks[BCM2835_CLOCK_VPU] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_vpu_data);
+	clks[BCM2835_CLOCK_V3D] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+	clks[BCM2835_CLOCK_ISP] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_isp_data);
+	clks[BCM2835_CLOCK_H264] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_h264_data);
+	clks[BCM2835_CLOCK_V3D] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+	clks[BCM2835_CLOCK_SDRAM] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_sdram_data);
+	clks[BCM2835_CLOCK_UART] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_uart_data);
+	clks[BCM2835_CLOCK_VEC] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_vec_data);
+	clks[BCM2835_CLOCK_HSM] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_hsm_data);
+	clks[BCM2835_CLOCK_EMMC] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_emmc_data);
+
+	/*
+	 * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+	 * you have the debug bit set in the power manager, which we
+	 * don't bother exposing) are individual gates off of the
+	 * non-stop vpu clock.
+	 */
+	clks[BCM2835_CLOCK_PERI_IMAGE] =
+		clk_register_gate(dev, "peri_image", "vpu",
+				  CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+				  cprman->regs + CM_PERIICTL, CM_GATE_BIT,
+				  0, &cprman->regs_lock);
+
+	return of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
+				   &cprman->onecell);
+}
+
+static const struct of_device_id bcm2835_clk_of_match[] = {
+	{ .compatible = "brcm,bcm2835-cprman", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
+
+static struct platform_driver bcm2835_clk_driver = {
+	.driver = {
+		.name = "bcm2835-clk",
+		.of_match_table = bcm2835_clk_of_match,
+	},
+	.probe          = bcm2835_clk_probe,
+};
+builtin_platform_driver(bcm2835_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@xxxxxxxxxx>");
+MODULE_DESCRIPTION("BCM2835 clock driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux