The patch is to add support to make the output voltage of ACT8865 DC/DC regulator determined by VSET2[] bits. The DT property "active-semi,vsel-high" is used to specify the VSEL pin at high on the board. When the VSEL pin is high, output voltage is programmed by VSET2[] bits. Changes in v2: - fix missed argument of macro "ACT88xx_REG" for act8865_alt_regulators structure variable. - set variable "voltage_select" initial value to avoid compile warning. Wenyou Yang (2): regulator: act8865: support output voltage by VSET2[] bits regulator: act8865: add DT binding for property "active-semi,vsel-high" .../bindings/regulator/act8865-regulator.txt | 3 +++ drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++-- 2 files changed, 25 insertions(+), 2 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html