Re: [PATCH 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Stephen Warren <swarren@xxxxxxxxxxxxx> writes:

> On 09/10/2015 03:22 PM, Eric Anholt wrote:
>> These will be used for enabling UART1, SPI1, and SPI2.
>
>> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
>
>> +		aux_clocks: aux-clocks@0x7e215004 {
>> +			compatible = "brcm,bcm2835-aux-clock";
>> +			#clock-cells = <1>;
>> +			reg = <0x7e215004 0x4>;
>
> Actually, I take back the ack on this patch. This HW module has two
> registers. The reg property should include both of those registers so
> that if SW needs to start using the other register at some time in the
> future, the entire set of registers is already represented in DT.

If I changed it to "reg = <0x7e215000 0x8>" and use a #define for the
clock register offset in patch 2/3, would I then have your ack?

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux