On 09/10/2015 03:22 PM, Eric Anholt wrote:
> These will be used for enabling UART1, SPI1, and SPI2.
> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
> + aux_clocks: aux-clocks@0x7e215004 {
> + compatible = "brcm,bcm2835-aux-clock";
> + #clock-cells = <1>;
> + reg = <0x7e215004 0x4>;
Actually, I take back the ack on this patch. This HW module has two
registers. The reg property should include both of those registers so
that if SW needs to start using the other register at some time in the
future, the entire set of registers is already represented in DT.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
