On Mon, Sep 21, 2015 at 12:08:44PM -0700, Eric Nelson wrote:
> Many decoders require a trailing space (period without IR illumination)
> to be delivered before completing a decode.
>
> Since the gpio-ir-recv driver only delivers events on gpio transitions,
> a single IR symbol (caused by a quick touch on an IR remote) will not
> be properly decoded without the use of a timer to flush the tail end
> state of the IR receiver.
>
> This patch initializes and uses a timer and the timeout field of rcdev
> to complete the stream and allow decode.
>
> The timeout can be overridden through the use of the LIRC_SET_REC_TIMEOUT
> ioctl.
Thanks, this is much nicer.
> Signed-off-by: Eric Nelson <eric@xxxxxxxxxx>
> ---
> drivers/media/rc/gpio-ir-recv.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
> index 7dbc9ca..d3b216a 100644
> --- a/drivers/media/rc/gpio-ir-recv.c
> +++ b/drivers/media/rc/gpio-ir-recv.c
> @@ -30,6 +30,7 @@ struct gpio_rc_dev {
> struct rc_dev *rcdev;
> int gpio_nr;
> bool active_low;
> + struct timer_list flush_timer;
> };
>
> #ifdef CONFIG_OF
> @@ -93,12 +94,26 @@ static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
> if (rc < 0)
> goto err_get_value;
>
> + mod_timer(&gpio_dev->flush_timer,
> + jiffies + nsecs_to_jiffies(gpio_dev->rcdev->timeout));
> +
> ir_raw_event_handle(gpio_dev->rcdev);
>
> err_get_value:
> return IRQ_HANDLED;
> }
>
> +static void flush_timer(unsigned long arg)
> +{
> + struct gpio_rc_dev *gpio_dev = (struct gpio_rc_dev *)arg;
> + DEFINE_IR_RAW_EVENT(ev);
> +
> + ev.timeout = true;
> + ev.duration = gpio_dev->rcdev->timeout;
Nitpick: two spaces, checkpatch would have found this.
> + ir_raw_event_store(gpio_dev->rcdev, &ev);
> + ir_raw_event_handle(gpio_dev->rcdev);
> +}
> +
> static int gpio_ir_recv_probe(struct platform_device *pdev)
> {
> struct gpio_rc_dev *gpio_dev;
> @@ -144,6 +159,9 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
> rcdev->input_id.version = 0x0100;
> rcdev->dev.parent = &pdev->dev;
> rcdev->driver_name = GPIO_IR_DRIVER_NAME;
> + rcdev->min_timeout = 1;
> + rcdev->timeout = IR_DEFAULT_TIMEOUT;
> + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
> if (pdata->allowed_protos)
> rcdev->allowed_protocols = pdata->allowed_protos;
> else
> @@ -154,6 +172,10 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
> gpio_dev->gpio_nr = pdata->gpio_nr;
> gpio_dev->active_low = pdata->active_low;
>
> + init_timer(&gpio_dev->flush_timer);
> + gpio_dev->flush_timer.function = flush_timer;
> + gpio_dev->flush_timer.data = (unsigned long)gpio_dev;
You could use "setup_timer(&gpio_dev->flush_timer, flush_timer, (unsigned long)gpio_dev);" here.
> +
> rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
> if (rc < 0)
> goto err_gpio_request;
You'll need a "del_timer_sync(&gpio_dev->flush_timer);" in
gpio_ir_recv_remove() or you'll have a race on remove.
Sean
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
