Many decoders require a trailing space (period without IR illumination)
to be delivered before completing a decode.
Since the gpio-ir-recv driver only delivers events on gpio transitions,
a single IR symbol (caused by a quick touch on an IR remote) will not
be properly decoded without the use of a timer to flush the tail end
state of the IR receiver.
This patch initializes and uses a timer and the timeout field of rcdev
to complete the stream and allow decode.
The timeout can be overridden through the use of the LIRC_SET_REC_TIMEOUT
ioctl.
Signed-off-by: Eric Nelson <eric@xxxxxxxxxx>
---
drivers/media/rc/gpio-ir-recv.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
index 7dbc9ca..d3b216a 100644
--- a/drivers/media/rc/gpio-ir-recv.c
+++ b/drivers/media/rc/gpio-ir-recv.c
@@ -30,6 +30,7 @@ struct gpio_rc_dev {
struct rc_dev *rcdev;
int gpio_nr;
bool active_low;
+ struct timer_list flush_timer;
};
#ifdef CONFIG_OF
@@ -93,12 +94,26 @@ static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
if (rc < 0)
goto err_get_value;
+ mod_timer(&gpio_dev->flush_timer,
+ jiffies + nsecs_to_jiffies(gpio_dev->rcdev->timeout));
+
ir_raw_event_handle(gpio_dev->rcdev);
err_get_value:
return IRQ_HANDLED;
}
+static void flush_timer(unsigned long arg)
+{
+ struct gpio_rc_dev *gpio_dev = (struct gpio_rc_dev *)arg;
+ DEFINE_IR_RAW_EVENT(ev);
+
+ ev.timeout = true;
+ ev.duration = gpio_dev->rcdev->timeout;
+ ir_raw_event_store(gpio_dev->rcdev, &ev);
+ ir_raw_event_handle(gpio_dev->rcdev);
+}
+
static int gpio_ir_recv_probe(struct platform_device *pdev)
{
struct gpio_rc_dev *gpio_dev;
@@ -144,6 +159,9 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
rcdev->input_id.version = 0x0100;
rcdev->dev.parent = &pdev->dev;
rcdev->driver_name = GPIO_IR_DRIVER_NAME;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
if (pdata->allowed_protos)
rcdev->allowed_protocols = pdata->allowed_protos;
else
@@ -154,6 +172,10 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
gpio_dev->gpio_nr = pdata->gpio_nr;
gpio_dev->active_low = pdata->active_low;
+ init_timer(&gpio_dev->flush_timer);
+ gpio_dev->flush_timer.function = flush_timer;
+ gpio_dev->flush_timer.data = (unsigned long)gpio_dev;
+
rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
if (rc < 0)
goto err_gpio_request;
--
2.5.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
