[PATCH 0/5] ARM: dts: sunxi: Add backlight node to q8 tablets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Maxime, Chen-Yu,

Here is a slightly updated version of Chen-Yu's backlight
patches, also adding support for the backlight found on A13 
based q8 tablets.

This series is based on mripard/sunxi/for-next with the following
patches on top (Maxime you've send mails indicating that you've merged
these alread, but you seem to have not pushed them yet) :

ARM: dts: sun5i: Add sun5i-q8-common.dtsi
ARM: dts: sun5i: Add dts file for q8 formfactor a13 based tablets
ARM: dts: sun8i: Add PWM controller node for A23/A33
ARM: dts: sun8i: Add PWM channel 0 pinmux setting for A23/A33

As discussed I've changed the "ARM: dts: sunxi: Enable PWM controller
on Q8 format tablets" patch to enable the pwm node in sunxi-q8-common.h
rather then in sunx8i-q8-common.h, other then that the 2 patches from
Chen-Yu are unchanged.

Regards,

Hans



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux