This series adds support for Marvell berlin4ct pin-controller, allowing to configure the pin muxing from the device tree. This series applies on top of patches adding GPIO support for berlin4ct[1]. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-September/371106.html Jisheng Zhang (5): pinctrl: berlin: regmap as an extra argument of berlin_pinctrl_probe() pinctrl: berlin: add the berlin4ct pinctrl driver arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs pinctrl: dt-binding: document berlin4ct SoC arm64: dts: berlin4ct: add the pinctrl node and muxing setup for uart0 .../devicetree/bindings/pinctrl/berlin,pinctrl.txt | 5 +- arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 27 ++ drivers/pinctrl/berlin/Kconfig | 5 + drivers/pinctrl/berlin/Makefile | 1 + drivers/pinctrl/berlin/berlin-bg2.c | 9 +- drivers/pinctrl/berlin/berlin-bg2cd.c | 9 +- drivers/pinctrl/berlin/berlin-bg2q.c | 9 +- drivers/pinctrl/berlin/berlin.c | 8 +- drivers/pinctrl/berlin/berlin.h | 1 + drivers/pinctrl/berlin/berlin4ct.c | 503 +++++++++++++++++++++ 11 files changed, 567 insertions(+), 11 deletions(-) create mode 100644 drivers/pinctrl/berlin/berlin4ct.c -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html