Patch set description? Once Rob is satisfied, please re-submit this set with Nicolas' Acks and I will re-review. > ChangeLog > > v9: > - go back to v5 (use the new "atmel,flexcom-mode" DT property). > - fix the name of the spi node in the DT example: from spi@f8034400 to > spi@400 > - align the fields of the struct platform_driver atmel_flexcom_driver as > suggested by Lee Jones. > > v8: > - fix the name of the spi node in the DT example: from spi@f8034400 to > spi@2,0 > - use the return code of op_property_read_u32_index() instead of -EINVAL > to report error. > - add Acked-by from Nicolas Ferre > > v7: > - read the operating mode from the very first u32 of the reg property from > the first available child node (should be unique). > - update the DT bindings documentation accordingly. > > v6: > - select the operating mode according to the "compatible" DT property of > the first available child node (should be unique). > - remove the "atmel,flexcom-mode" DT property so the need of a header file > defining macros for the possible values of this deprecated property. > > v5: > - create a header file containing macros used by DT bindings > - use numeric constants instead of strings to select the Flexcom mode > - change the license to "GPL v2" > - update the DT binding documentation to make it more readable and add > references to USART, SPI and I2C DT binding documentations. remove the > useless label in the Example section. > - change the register prefix from FX_ to FLEX_ to match the Flexcom > programmer datasheet. > - rename some variables to make them more understandable. > > v4: > - check clk_prepare_enable() return code in atmel_flexcom_probe() > - add a commit message to the DT binding patch > > v3: > - remove MODULE_ALIAS() > - add Acked-by from Boris Brezillon and Alexandre Belloni > > v2: > - enhance the documentation of DT bindings and change the way the "ranges" > property is used. > - replace __raw_readl() and __raw_writel() by readl() and writel(). > - change the module license to "GPL" for v2 or later > - print the selected flexcom mode after the hardware version > > v1: > This series of patches a support to the Atmel Flexcom, a wrapper which > integrates an USART, a SPI controller and a TWI controller. Only one > peripheral can be used at a time. The active function is selected though > the Flexcom Mode Register. > > Cyrille Pitchen (3): > mfd: atmel-flexcom: create include file with macros used by DT > bindings > mfd: devicetree: add bindings for Atmel Flexcom > mfd: atmel-flexcom: add a driver for Atmel Flexible Serial > Communication Unit > > .../devicetree/bindings/mfd/atmel-flexcom.txt | 67 +++++++++++++ > drivers/mfd/Kconfig | 11 +++ > drivers/mfd/Makefile | 1 + > drivers/mfd/atmel-flexcom.c | 104 +++++++++++++++++++++ > include/dt-bindings/mfd/atmel-flexcom.h | 16 ++++ > 5 files changed, 199 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > create mode 100644 drivers/mfd/atmel-flexcom.c > create mode 100644 include/dt-bindings/mfd/atmel-flexcom.h > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
