Hi Tony, This series adds the sub-mailbox nodes and enable them for each of the TI DRA7 boards. These are the basic mailbox configuration nodes required by client users (remoteproc) to communicate with the various IPU and DSP processor devices on DRA74x and DRA72x SoCs using the TI IPC 3.x software foundation on the remote processor firmwares. The mailboxes used are unfortunately hardcoded in the TI IPC 3.x software, and hence the weird usage of Mailbox 5 and 6 rather than starting from Mailbox 1. Any third-party or derived boards can use their own configuration if running their own IPC stack, and that can be done by overwriting the properties or by using different sub-mailbox nodes altogether. The actual enablement of nodes is therefore done in the respective board DTS files. Patches are based on 4.3-rc1 and are intended for the 4.4 merge window. regards Suman Suman Anna (5): ARM: dts: DRA74x: Add IPC sub-mailbox nodes for all IPUs & DSPs ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1 ARM: dts: dra7-evm: Enable the system mailboxes 5 and 6 ARM: dts: dra72-evm: Enable the system mailboxes 5 and 6 ARM: dts: beagle-x15: Enable the system mailboxes 5 and 6 arch/arm/boot/dts/am57xx-beagle-x15.dts | 20 ++++++++++++++++++++ arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ arch/arm/boot/dts/dra72-evm.dts | 17 +++++++++++++++++ arch/arm/boot/dts/dra72x.dtsi | 21 +++++++++++++++++++++ arch/arm/boot/dts/dra74x.dtsi | 26 ++++++++++++++++++++++++++ 5 files changed, 104 insertions(+) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
