hi architt On 2015/9/16 17:10, Archit Taneja wrote: > Hi, > > On 09/16/2015 02:04 PM, Xinwei Kong wrote: >> hi architt >> >> On 2015/9/16 2:11, Rob Herring wrote: >>> On 09/15/2015 04:37 AM, Xinwei Kong wrote: >>>> This adds documentation of device tree bindings for the >>>> Graphics Processing Unit of hi6220 SOC. >>>> >>>> Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx> >>>> Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx> >>>> Signed-off-by: Andy Green <andy.green@xxxxxxxxxx> >>>> Signed-off-by: Jiwen Qi <qijiwen@xxxxxxxxxxxxx> >>>> Signed-off-by: Yu Gong <gongyu@xxxxxxxxxxxxx> >>>> --- >>>> .../devicetree/bindings/gpu/hisilicon,hi6220.txt | 69 ++++++++++++++++++++++ >>>> 1 file changed, 69 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt >>>> >>>> diff --git a/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt b/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt >>>> new file mode 100644 >>>> index 0000000..173ac63 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt >>>> @@ -0,0 +1,69 @@ >>>> + * Hisilicon hi6220 Graphics Processing Unit for HiKey board >>>> + >>>> + ** display-subsystem: Master device for binding DRM sub-components >>> >>> DRM is a Linuxism that doesn't belong in the binding. >>> >>>> + This master device is parent node and it will be responsible to bind all >>>> + sub-components devices node. >>> >>> Are these nodes a single block in the h/w? If not, you should describe >>> the connection of sub-nodes with of-graph instead. >>> >>>> + - Required properties : >>>> + - compatible: "hisilicon,display-subsystem". >>>> + - #address-cells, #size-cells: Must be present if the device has sub-nodes. >>>> + - ranges: to allow probing of subdevices. >>>> + - dma-coherent: Present if dma operations are coherent. >>>> + >>>> + ** ade: Graphic overlay, Graphic post-processing, display timing control. >>>> + This device is child node of display-subsystem >>>> + - Required properties : >>>> + - compatible: "hisilicon,hi6220-ade". >>>> + - reg: physical base address of the ADE register and length of memory >>>> + region. >>>> + - reg-names: Should contain the reg names "ade_base" and "media_base". >>>> + - interrupt: The interrupt number to the cpu. Defines the interrupt >>>> + by ADE. >>>> + - clocks: The clocks needed by the ADE module. >>>> + - clock-names: the name of the clocks. >>>> + >>>> + ** dsi: support mipi dsi interface >>>> + This device is child node of display-subsystem >>>> + - Required properties : >>>> + - compatible: "hisilicon,hi6220-dsi". >>>> + - reg: physical base address of the DSI register and length of memory >>>> + region. >>>> + - clocks: The clocks needed by the DSI module. >>>> + - clock-names: the name of the clocks. >>>> + - encoder-slave: phandles to a 'encoder-slave' subnode which DSI connect >>>> + ADV7533 in order to support hdmi display. >>> >>> What the ADV7533 binding looks like is still being discussed. >>> "encoder-slave" is certainly DRM specific and not how it should be done. >>> Most likely, this needs to use the of-graph ports. >>> >> I dont how to implement the encoder bridge stuff in upstream, >> you think that I will how to handle this part? > > You can use of-graph ports to link the dsi output with the adv7533 > bridge. > > An example of the binding looks like: > > Documentation/devicetree/bindings/drm/msm/dsi.txt > > The implementation of this on the dsi host side of drm/msm > can be found in dsi_host_parse_dt, in: > > drivers/gpu/drm/msm/dsi/dsi_host.c > > You can get to know more about of-graph parsing here: > > Documentation/devicetree/bindings/graph.txt > I study your patch about of-graph parsing, I know that how to parse this dts endpoint node. Then i dont kow how to use this device_node (which is get by "of_graph_get_remote_port_parent" function.) to hook adv7533 operation. can you give me some help to how to use the adv7533 interface by device_node or other way to use adv7533? > I'd started going through the drm/hisil patches. I'll > share more comments there. > > Thanks, > Archit > >> >> Thank you >> xinwei >> >>> Also, the ADV7533 connection is specific to HiKey. This binding should >>> just generically describe how any bridge or panel is connected. >>> >>> Rob >>> >>> . >>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html