hi architt On 2015/9/16 2:11, Rob Herring wrote: > On 09/15/2015 04:37 AM, Xinwei Kong wrote: >> This adds documentation of device tree bindings for the >> Graphics Processing Unit of hi6220 SOC. >> >> Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx> >> Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx> >> Signed-off-by: Andy Green <andy.green@xxxxxxxxxx> >> Signed-off-by: Jiwen Qi <qijiwen@xxxxxxxxxxxxx> >> Signed-off-by: Yu Gong <gongyu@xxxxxxxxxxxxx> >> --- >> .../devicetree/bindings/gpu/hisilicon,hi6220.txt | 69 ++++++++++++++++++++++ >> 1 file changed, 69 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt >> >> diff --git a/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt b/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt >> new file mode 100644 >> index 0000000..173ac63 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpu/hisilicon,hi6220.txt >> @@ -0,0 +1,69 @@ >> + * Hisilicon hi6220 Graphics Processing Unit for HiKey board >> + >> + ** display-subsystem: Master device for binding DRM sub-components > > DRM is a Linuxism that doesn't belong in the binding. > >> + This master device is parent node and it will be responsible to bind all >> + sub-components devices node. > > Are these nodes a single block in the h/w? If not, you should describe > the connection of sub-nodes with of-graph instead. > >> + - Required properties : >> + - compatible: "hisilicon,display-subsystem". >> + - #address-cells, #size-cells: Must be present if the device has sub-nodes. >> + - ranges: to allow probing of subdevices. >> + - dma-coherent: Present if dma operations are coherent. >> + >> + ** ade: Graphic overlay, Graphic post-processing, display timing control. >> + This device is child node of display-subsystem >> + - Required properties : >> + - compatible: "hisilicon,hi6220-ade". >> + - reg: physical base address of the ADE register and length of memory >> + region. >> + - reg-names: Should contain the reg names "ade_base" and "media_base". >> + - interrupt: The interrupt number to the cpu. Defines the interrupt >> + by ADE. >> + - clocks: The clocks needed by the ADE module. >> + - clock-names: the name of the clocks. >> + >> + ** dsi: support mipi dsi interface >> + This device is child node of display-subsystem >> + - Required properties : >> + - compatible: "hisilicon,hi6220-dsi". >> + - reg: physical base address of the DSI register and length of memory >> + region. >> + - clocks: The clocks needed by the DSI module. >> + - clock-names: the name of the clocks. >> + - encoder-slave: phandles to a 'encoder-slave' subnode which DSI connect >> + ADV7533 in order to support hdmi display. > > What the ADV7533 binding looks like is still being discussed. > "encoder-slave" is certainly DRM specific and not how it should be done. > Most likely, this needs to use the of-graph ports. > I dont how to implement the encoder bridge stuff in upstream, you think that I will how to handle this part? Thank you xinwei > Also, the ADV7533 connection is specific to HiKey. This binding should > just generically describe how any bridge or panel is connected. > > Rob > > . > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html