On 15 September 2015 at 20:58, Cyrille Pitchen
<cyrille.pitchen@xxxxxxxxx> wrote:
> When their quad or dual I/O mode is enabled, Micron and Macronix spi-nor
> memories don't reply to the regular Read ID (0x9f) command. Instead they
> reply to a new dedicated command Read ID Multiple I/O (0xaf).
>
> If the Read ID (0x9f) command fails (the read ID is all 1's or all 0's),
> then the Read ID Multiple I/O (0xaf) is used, first with SPI 4-4-4 protocol
> (supported by both Micron and Macronix memories), lately with SPI-2-2-2
> protocol (supported only by Micron memories).
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
> ---
> drivers/mtd/devices/m25p80.c | 8 +-----
> drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
> drivers/mtd/spi-nor/nxp-spifi.c | 13 +++------
> drivers/mtd/spi-nor/spi-nor.c | 59 ++++++++++++++++++++++++++++++++++-----
> include/linux/mtd/spi-nor.h | 27 +++++++++++++++---
> 5 files changed, 81 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 4b5d7a4655fd..1457866a4930 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -179,7 +179,6 @@ static int m25p_probe(struct spi_device *spi)
> struct flash_platform_data *data;
> struct m25p *flash;
> struct spi_nor *nor;
> - enum read_mode mode = SPI_NOR_NORMAL;
> char *flash_name = NULL;
> int ret;
>
> @@ -205,11 +204,6 @@ static int m25p_probe(struct spi_device *spi)
> spi_set_drvdata(spi, flash);
> flash->spi = spi;
>
> - if (spi->mode & SPI_RX_QUAD)
> - mode = SPI_NOR_QUAD;
> - else if (spi->mode & SPI_RX_DUAL)
> - mode = SPI_NOR_DUAL;
> -
> if (data && data->name)
> nor->mtd.name = data->name;
>
> @@ -223,7 +217,7 @@ static int m25p_probe(struct spi_device *spi)
> else
> flash_name = spi->modalias;
>
> - ret = spi_nor_scan(nor, flash_name, mode);
> + ret = spi_nor_scan(nor, flash_name, spi->mode);
IMHO, this is certainly incorrect because spi-nor never know anything
about spi (Linux) that is why this framework got into picture.
> if (ret)
> return ret;
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 2954f89fc8be..1ded5dbe2240 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -1033,7 +1033,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
> /* set the chip address for READID */
> fsl_qspi_set_base_addr(q, nor);
>
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + ret = spi_nor_scan(nor, NULL, SPI_RX_QUAD);
> if (ret)
> goto mutex_failed;
>
> diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
> index 9e82098ae644..c499f3258245 100644
> --- a/drivers/mtd/spi-nor/nxp-spifi.c
> +++ b/drivers/mtd/spi-nor/nxp-spifi.c
> @@ -272,7 +272,6 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
> struct device_node *np)
> {
> struct mtd_part_parser_data ppdata;
> - enum read_mode flash_read;
> u32 ctrl, property;
> u16 mode = 0;
> int ret;
> @@ -304,16 +303,12 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
> SPIFI_CTRL_CSHIGH(15) |
> SPIFI_CTRL_FBCLK;
>
> - if (mode & SPI_RX_DUAL) {
> + if (mode & SPI_RX_DUAL)
> ctrl |= SPIFI_CTRL_DUAL;
> - flash_read = SPI_NOR_DUAL;
> - } else if (mode & SPI_RX_QUAD) {
> + else if (mode & SPI_RX_QUAD)
> ctrl &= ~SPIFI_CTRL_DUAL;
> - flash_read = SPI_NOR_QUAD;
> - } else {
> + else
> ctrl |= SPIFI_CTRL_DUAL;
> - flash_read = SPI_NOR_NORMAL;
> - }
>
> switch (mode & (SPI_CPHA | SPI_CPOL)) {
> case SPI_MODE_0:
> @@ -349,7 +344,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
> */
> nxp_spifi_dummy_id_read(&spifi->nor);
>
> - ret = spi_nor_scan(&spifi->nor, NULL, flash_read);
> + ret = spi_nor_scan(&spifi->nor, NULL, mode);
> if (ret) {
> dev_err(spifi->dev, "device scan failed\n");
> return ret;
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 8818d4325d20..1908038c8f2e 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -20,6 +20,7 @@
> #include <linux/mtd/cfi.h>
> #include <linux/mtd/mtd.h>
> #include <linux/of_platform.h>
> +#include <linux/spi/spi.h>
Same comment as above - don't use spi on spi-nor.
> #include <linux/spi/flash.h>
> #include <linux/mtd/spi-nor.h>
>
> @@ -61,6 +62,11 @@ struct flash_info {
>
> #define JEDEC_MFR(info) ((info)->id[0])
>
> +struct read_id_proto {
> + enum spi_protocol proto; /* SPI protocol to read the JEDEC ID */
> + u16 mode; /* SPI controller required caps */
> +};
> +
> static const struct flash_info *spi_nor_match_id(const char *name);
>
> /*
> @@ -701,11 +707,15 @@ static const struct flash_info spi_nor_ids[] = {
> { },
> };
>
> -static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
> +static const struct flash_info *spi_nor_read_id(struct spi_nor *nor, u16 mode)
> {
> - int tmp;
> + int i, tmp;
> u8 id[SPI_NOR_MAX_ID_LEN];
> const struct flash_info *info;
> + static const struct read_id_proto proto[] = {
> + { SPI_PROTO_4_4_4, SPI_RX_QUAD | SPI_TX_QUAD },
> + { SPI_PROTO_2_2_2, SPI_RX_DUAL | SPI_TX_DUAL }
> + };
>
> tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
> if (tmp < 0) {
> @@ -713,6 +723,35 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
> return ERR_PTR(tmp);
> }
>
> + /* Special case for Micron/Macronix qspi nor. */
> + for (i = 0; i < ARRAY_SIZE(proto); ++i) {
> + if (!((id[0] == 0xff && id[1] == 0xff && id[2] == 0xff) ||
> + (id[0] == 0x00 && id[1] == 0x00 && id[2] == 0x00)))
> + break;
> +
> + /* Check whether the SPI controller supports this protocol. */
> + if ((mode & proto[i].mode) != proto[i].mode)
> + continue;
> +
> + nor->erase_proto = proto[i].proto;
> + nor->read_proto = proto[i].proto;
> + nor->write_proto = proto[i].proto;
> + nor->reg_proto = proto[i].proto;
> +
> + /*
> + * Multiple I/O Read ID only returns the Manufacturer ID
> + * (1 byte) and the Device ID (2 bytes). So we reset the
> + * remaining bytes.
> + */
> + memset(id, 0, sizeof(id));
> + tmp = nor->read_reg(nor, SPINOR_OP_MIO_RDID, id, 3);
> + if (tmp < 0) {
> + dev_dbg(nor->dev,
> + " error %d reading JEDEC ID (MULTI IO)\n", tmp);
> + return ERR_PTR(tmp);
> + }
> + }
> +
> for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
> info = &spi_nor_ids[tmp];
> if (info->id_len) {
> @@ -999,7 +1038,7 @@ static int spi_nor_check(struct spi_nor *nor)
> return 0;
> }
>
> -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> +int spi_nor_scan(struct spi_nor *nor, const char *name, u16 mode)
> {
> const struct flash_info *info = NULL;
> struct device *dev = nor->dev;
> @@ -1012,11 +1051,17 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> if (ret)
> return ret;
>
> + /* Reset SPI protocol for all commands */
> + nor->erase_proto = SPI_PROTO_1_1_1;
> + nor->read_proto = SPI_PROTO_1_1_1;
> + nor->write_proto = SPI_PROTO_1_1_1;
> + nor->reg_proto = SPI_PROTO_1_1_1;
> +
> if (name)
> info = spi_nor_match_id(name);
> /* Try to auto-detect if chip name wasn't specified or not found */
> if (!info)
> - info = spi_nor_read_id(nor);
> + info = spi_nor_read_id(nor, mode);
> if (IS_ERR_OR_NULL(info))
> return -ENOENT;
>
> @@ -1027,7 +1072,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> if (name && info->id_len) {
> const struct flash_info *jinfo;
>
> - jinfo = spi_nor_read_id(nor);
> + jinfo = spi_nor_read_id(nor, mode);
> if (IS_ERR(jinfo)) {
> return PTR_ERR(jinfo);
> } else if (jinfo != info) {
> @@ -1126,14 +1171,14 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> nor->flash_read = SPI_NOR_NORMAL;
>
> /* Quad/Dual-read mode takes precedence over fast/normal */
> - if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
> + if (mode & SPI_RX_QUAD && info->flags & SPI_NOR_QUAD_READ) {
> ret = set_quad_mode(nor, info);
> if (ret) {
> dev_err(dev, "quad mode not supported\n");
> return ret;
> }
> nor->flash_read = SPI_NOR_QUAD;
> - } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
> + } else if (mode & SPI_RX_DUAL && info->flags & SPI_NOR_DUAL_READ) {
> nor->flash_read = SPI_NOR_DUAL;
> }
>
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 672595a381c5..32339e82cb9d 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -57,8 +57,9 @@
> #define SPINOR_OP_BRWR 0x17 /* Bank register write */
>
> /* Used for Micron flashes only. */
> -#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
> -#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
> +#define SPINOR_OP_MIO_RDID 0xaf /* Multiple I/O Read JEDEC ID */
> +#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
> +#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
>
> /* Status Register bits. */
> #define SR_WIP 1 /* Write in progress */
> @@ -87,6 +88,16 @@ enum read_mode {
> SPI_NOR_QUAD,
> };
>
> +enum spi_protocol {
> + SPI_PROTO_1_1_1, /* SPI */
> + SPI_PROTO_1_1_2, /* Dual Output */
> + SPI_PROTO_1_1_4, /* Quad Output */
> + SPI_PROTO_1_2_2, /* Dual IO */
> + SPI_PROTO_1_4_4, /* Quad IO */
> + SPI_PROTO_2_2_2, /* Dual Command */
> + SPI_PROTO_4_4_4, /* Quad Command */
> +};
> +
> #define SPI_NOR_MAX_CMD_SIZE 8
> enum spi_nor_ops {
> SPI_NOR_OPS_READ = 0,
> @@ -117,6 +128,10 @@ struct mtd_info;
> * @flash_read: the mode of the read
> * @sst_write_second: used by the SST write operation
> * @flags: flag options for the current SPI-NOR (SNOR_F_*)
> + * @erase_proto: the SPI protocol used by erase operations
> + * @read_proto: the SPI protocol used by read operations
> + * @write_proto: the SPI protocol used by write operations
> + * @reg_proto the SPI protocol used by read_reg/write_reg operations
> * @cmd_buf: used by the write_reg
> * @prepare: [OPTIONAL] do some preparations for the
> * read/write/erase/lock/unlock operations
> @@ -143,6 +158,10 @@ struct spi_nor {
> u8 read_opcode;
> u8 read_dummy;
> u8 program_opcode;
> + enum spi_protocol erase_proto;
> + enum spi_protocol read_proto;
> + enum spi_protocol write_proto;
> + enum spi_protocol reg_proto;
> enum read_mode flash_read;
> bool sst_write_second;
> u32 flags;
> @@ -169,7 +188,7 @@ struct spi_nor {
> * spi_nor_scan() - scan the SPI NOR
> * @nor: the spi_nor structure
> * @name: the chip type name
> - * @mode: the read mode supported by the driver
> + * @mode: the bitmask or TX/RX modes supported by the driver
> *
> * The drivers can use this fuction to scan the SPI NOR.
> * In the scanning, it will try to get all the necessary information to
> @@ -179,6 +198,6 @@ struct spi_nor {
> *
> * Return: 0 for success, others for failure.
> */
> -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
> +int spi_nor_scan(struct spi_nor *nor, const char *name, u16 mode);
>
> #endif
> --
> 1.8.2.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
thanks!
--
Jagan | openedev.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
