Hi all,
this series is still a work in progress though it is almost finished.
The support of Macronix dummy code to configure the number of dummy cycles
is still missing...
However I would like some feedbacks to synchronize this work with other
mtd / spi-nor improvements as I see lots of patches on the mailing list.
Best Regards,
Cyrille
Cyrille Pitchen (6):
mtd: spi-nor: remove unused read_xfer/write_xfer hooks
mtd: spi-nor: read JEDEC ID with multiple I/O protocols
mtd: spi-nor: set the read op code and protocol based on the
manufacturer
mtd: m25p80: add support of dual and quad spi protocols to all
commands
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
drivers/mtd/devices/m25p80.c | 262 ++++--
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 880 +++++++++++++++++++++
drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
drivers/mtd/spi-nor/nxp-spifi.c | 13 +-
drivers/mtd/spi-nor/spi-nor.c | 603 ++++++++++++--
include/linux/mtd/spi-nor.h | 68 +-
9 files changed, 1689 insertions(+), 176 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
