On 09/09/15 21:27, Jyri Sarha wrote:
The slot_width is for essentially same thing. Instead of storing
bclk_lrclk_ratio, just store the slot_width. Comments has been updated
accordingly and some variable names changed to more descriptive.
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
sound/soc/davinci/davinci-mcasp.c | 56 ++++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 25 deletions(-)
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index de1e3a8..25ff1fc 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -87,7 +87,6 @@ struct davinci_mcasp {
u8 *serial_dir;
u8 version;
u8 bclk_div;
- u16 bclk_lrclk_ratio;
int streams;
u32 irq_request[2];
int dma_request[2];
@@ -558,8 +557,21 @@ static int __davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id,
mcasp->bclk_div = div;
break;
- case 2: /* BCLK/LRCLK ratio */
- mcasp->bclk_lrclk_ratio = div;
+ case 2: /*
+ * BCLK/LRCLK ratio descries how many bit-clock cycles
+ * fit into one frame. The clock ratio is given for a
+ * full period of data (for I2S format both left and
+ * right channels), so it has to be divided by number
+ * of tdm-slots (for I2S - divided by 2).
+ * Instead of storing this ratio, we calculate a new
+ * tdm_slot width by dividing the the ratio by the
+ * number of configured tdm slots.
+ */
+ mcasp->slot_width = div / mcasp->tdm_slots;
+ if (div % mcasp->tdm_slots)
+ dev_warn(mcasp->dev,
+ "%s(): BCLK/LRCLK %d is not divisible by %d tdm slots",
+ div, mcasp->tdm_slots);
Oops, there is a __func__ missing here.
break;
default:
@@ -682,11 +694,13 @@ static int davinci_mcasp_set_tdm_slot(struct snd_soc_dai *dai,
}
static int davinci_config_channel_size(struct davinci_mcasp *mcasp,
- int word_length)
+ int sample_width)
{
u32 fmt;
- u32 tx_rotate = (word_length / 4) & 0x7;
- u32 mask = (1ULL << word_length) - 1;
+ u32 tx_rotate = (sample_width / 4) & 0x7;
+ u32 mask = (1ULL << sample_width) - 1;
+ u32 slot_width = sample_width;
+
/*
* For captured data we should not rotate, inversion and masking is
* enoguh to get the data to the right position:
@@ -699,31 +713,23 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp,
u32 rx_rotate = 0;
/*
- * if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv()
- * callback, take it into account here. That allows us to for example
- * send 32 bits per channel to the codec, while only 16 of them carry
- * audio payload.
- * The clock ratio is given for a full period of data (for I2S format
- * both left and right channels), so it has to be divided by number of
- * tdm-slots (for I2S - divided by 2).
+ * Setting the tdm slot width either with set_clkdiv() or
+ * set_tdm_slot() allows us to for example send 32 bits per
+ * channel to the codec, while only 16 of them carry audio
+ * payload.
*/
- if (mcasp->bclk_lrclk_ratio) {
- u32 slot_length = mcasp->bclk_lrclk_ratio / mcasp->tdm_slots;
-
+ if (mcasp->slot_width) {
/*
- * When we have more bclk then it is needed for the data, we
- * need to use the rotation to move the received samples to have
- * correct alignment.
+ * When we have more bclk then it is needed for the
+ * data, we need to use the rotation to move the
+ * received samples to have correct alignment.
*/
- rx_rotate = (slot_length - word_length) / 4;
- word_length = slot_length;
- } else if (mcasp->slot_width) {
- rx_rotate = (mcasp->slot_width - word_length) / 4;
- word_length = mcasp->slot_width;
+ slot_width = mcasp->slot_width;
+ rx_rotate = (slot_width - sample_width) / 4;
}
/* mapping of the XSSZ bit-field as described in the datasheet */
- fmt = (word_length >> 1) - 1;
+ fmt = (slot_width >> 1) - 1;
if (mcasp->op_mode != DAVINCI_MCASP_DIT_MODE) {
mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, RXSSZ(fmt),
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
