On 9/8/2015 00:23, Mark Brown wrote:
On Sun, Sep 06, 2015 at 05:44:21PM +0800, Wu, Songjun wrote:
On 9/3/2015 19:37, Mark Brown wrote:
On Tue, Sep 01, 2015 at 01:41:40PM +0800, Songjun Wu wrote:
+static const char * const eqcfg_bass_text[] = {
+ "-12 dB", "-6 dB", "0 dB", "+6 dB", "+12 dB"
+};
+static const unsigned int eqcfg_bass_value[] = {
+ CLASSD_INTPMR_EQCFG_B_CUT_12,
+ CLASSD_INTPMR_EQCFG_B_CUT_6, CLASSD_INTPMR_EQCFG_FLAT,
+ CLASSD_INTPMR_EQCFG_B_BOOST_6, CLASSD_INTPMR_EQCFG_B_BOOST_12
+};
This should be a Volume control with TLV information, as should the
following few controls.
The Volume control with TLV information is not suitable for this case.
Bass, Medium, and treble are mutually exclusive.
So I think the SOC_ENUM control is suitable for this case.
The register layout is not very good,
The register is defined as below.
• EQCFG: Equalization Selection
Value Name Description
0 FLAT Flat Response
1 BBOOST12 Bass boost +12 dB
2 BBOOST6 Bass boost +6 dB
3 BCUT12 Bass cut -12 dB
4 BCUT6 Bass cut -6 dB
5 MBOOST3 Medium boost +3 dB
6 MBOOST8 Medium boost +8 dB
7 MCUT3 Medium cut -3 dB
8 MCUT8 Medium cut -8 dB
9 TBOOST12 Treble boost +12 dB
10 TBOOST6 Treble boost +6 dB
11 TCUT12 Treble cut -12 dB
12 TCUT6 Treble cut -6 dB
OK, so that's not actually what the code was doing - it had separate
enums for bass, mid and treble. If you make this a single enum with all
the above options in it that seems like the best way of handling things.
A single enum seems not very friendly to user, there are tree EQs, bass,
medium and treble.
So I create tree enum controls to control three EQs.
The 'get' function is replaced by 'classd_get_eq_enum', if user operates
one of the tree EQ controls, the other two EQs will show 0 dB.
+static const struct snd_kcontrol_new atmel_classd_snd_controls[] = {
+SOC_SINGLE_TLV("Left Volume", CLASSD_INTPMR,
+ CLASSD_INTPMR_ATTL_SHIFT, 78, 1, classd_digital_tlv),
+
+SOC_SINGLE_TLV("Right Volume", CLASSD_INTPMR,
+ CLASSD_INTPMR_ATTR_SHIFT, 78, 1, classd_digital_tlv),
This should be a single stereo control rather than separate left and
right controls.
Since the classD IP defines two register fields to control left volume and
right volume respectively, I think it's better to provide two controls to
user.
No, this is really common, we combine them in Linux to present a
consistent interface to userspace.
I think carefully, your suggestion is reasonable.
The code will be modified, combine the left and right to a single stereo
control.
Thank you.
+ dev_info(dev,
+ "Atmel Class D Amplifier (CLASSD) device at 0x%p (irq %d)\n",
+ io_base, dd->irq);
This is a bit noisy and not really based on interaction with the
hardware... dev_dbg() seems better.
This information will occur only once when linux kernel starts.
It shows the classD is loaded to linux kernel.
I think it's better to provide more information to user.
This stuff all adds up and since it'll go out on the console by default
it both makes things more noisy and slows down boot - printing on the
serial port isn't free. If we want to have this sort of information we
printed we should really do it in the driver core so it appears
consistently for all devices rather than having individual code in each
driver.
Accept, the code will be modified to dev_dbg().
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html