Thanks for your feedback, some comments inline.
On 31.08.2015 18:38, Rob Herring wrote:
On Thu, Aug 27, 2015 at 3:23 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
On 20/08/15 11:12, Adriana Reus wrote:
Added entries in i2c/vendor-prefixes for the us5182d als and proximity sensor.
Also added a documentation file for this sensor's properties.
Signed-off-by: Adriana Reus <adriana.reus@xxxxxxxxx>
This isn't that trivial so I'd like some device tree maintainer
input if possible.
It seems fairly reasonable to me. Would other ALS or proximity sensors
need similar properties?
The "glass-coef" is intended to compensate for the material (glass) that
may be covering the sensor if it's integrated in a phone, tablet etc. I
chose 1000 as resolution for this scaling factor (i'll add a more
detailed description). So possibly similar properties could be used for
other als sensors as well.
The last 3 tuning parameters are specific to this particular sensor.
For now I've backed out the driver from my tree (given timing we have
loads of time to sort this out!)
Anyhow, anyone device tree related able to take a look at this.
Adriana, btw these should be cc'd to the device tree maintainers in
the first place (now added).
Jonathan
---
.../devicetree/bindings/iio/light/us5182d.txt | 23 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/us5182d.txt
diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
new file mode 100644
index 0000000..7785c56
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt
@@ -0,0 +1,23 @@
+* UPISEMI us5182d I2C ALS and Proximity sensor
+
+Required properties:
+- compatible: must be "upisemi,usd5182"
+- reg: the I2C address of the device
+
+Optional properties:
Do you expect certain defaults if not present? Some description of how
all these values are determined would be useful.
Yes, if not present they will fall back to default values - the values
in the example.
- the glass-coef one is 1000 by default - so no glass compensation by
default (lux = lux * 1000/1000)
- the others were determined experimentally - by fine tuning starting
from the default values in those registers).
+- upisemi,glass-coef: glass attenuation factor
+- upisemi,dark-ths: array of thresholds (adc counts) corresponding to every scale
What is the size of the array and valid range of values?
Be specific this is 16-bit property.
Ok, I'll add this info in a following patch set.
+- upisemi,upper-dark-gain: tuning factor(4 int and 4 fractional bits - Q4.4) applied when light > threshold
+- upisemi,lower-dark-gain: tuning factor(4 int and 4 fractional bits - Q4.4) applied when light < threshold
Be specific this is an 8-bit property.
ok
+
+Example:
+
+ usd5182@39 {
+ compatible = "upisemi,usd5182";
+ reg = <0x39>;
+ upisemi,glass-coef = < 1000 >;
+ upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
+ upisemi,upper-dark-gain = /bits/ 8 <0x00>;
+ upisemi,lower-dark-gain = /bits/ 8 <0x16>;
+ };
+
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757..5b40bab 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -211,6 +211,7 @@ toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
truly Truly Semiconductors Limited
+upisemi uPI Semiconductor Corp.
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
variscite Variscite Ltd.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
