Hello, Tested on Greg's tree char-misc-next branch along with Stefan's NAND driver patchset. Sample output on Colibri VF50 root@colibri-vf:/sys/bus/nvmem/devices/ocotp0# uname -a Linux colibri-vf 4.2.0-rc6-00009-g1cec223 #5 SMP Mon Sep 7 12:34:37 IST 2015 armv7l GNU/Linux root@colibri-vf:/sys/bus/nvmem/devices/ocotp0# hexdump nvmem 0000000 0000 0000 0000 0000 0000 0000 0000 0000 * 0000410 72a6 df64 0000 0000 0000 0000 0000 0000 0000420 11d4 2006 0000 0000 0000 0000 0000 0000 0000430 0000 0000 0000 0000 0000 0000 0000 0000 * 0000450 0280 0000 0000 0000 0000 0000 0000 0000 0000460 0000 0000 0000 0000 0000 0000 0000 0000 * 0000880 8f01 0000 0000 0000 0000 0000 0000 0000 0000890 0000 0000 0000 0000 0000 0000 0000 0000 * 00008c0 0000 1300 0000 0000 0000 0000 0000 0000 00008d0 320a 0800 0000 0000 0000 0000 0000 0000 00008e0 0000 e200 0000 0000 0000 0000 0000 0000 00008f0 0000 0000 0000 0000 0000 0000 0000 0000 * 0000c80 bada bada 0000 0000 0000 0000 0000 0000 * 0000cc0 0000 0000 0000 0000 0000 0000 0000 0000 * 0000cf0 Changes since v9: 1. Drop clock-names property from DT 2. Rebase on top of latest char-misc-next Changes since v8: 1. Fix three lines over 80 characters 2. Rebase on top of Greg's char-misc-next branch Changes since v7: 1. Add COMPILE_TEST to Kconfig 2. Use GENMASK and BIT macros where applicable 3. Fix a code alignment issue 4. Get the max_register value for regmap config using resource_size() 5. Also add copyright info as the driver logic is based off on ocotp code in barebox 6. Add missing info related to clock in DT binding doc Changes since v6: 1. Use the v9 of NVMEM framework patchset 2. Add a few comments 3. Initialise buffer address not part of the fuse map to 0 instead of only handling buffer locations with valid fuse addresses. Changes since v5: Use NVMEM framework by Srinivas and Maxime Changes since v4: 1. Use devm_* family of functions and use a struct to get rid of global variables (suggested by Joachim Eastwood) 2. Make Kconfig govern the compilation with tristate, instead of earlier bool. Paul Bolle raised a valid point that perhaps this should have been built in with the bool, however I had not taken into consideration generic distro kernels and it makes sense to have this tristated. (comments from Paul Bolle and Andreas Farber) Changes since v3: Instead of using the syscon_regmap_lookup_by_compatible function use a phandle in the device tree along with offsets specified in this phandle node and then read the offset along with the device node in the driver for reading from the required region. Changes since v2: Implement the SoC bus code as a driver in drivers/soc by registering with fsl,mscm-cpucfg as per Arnd's feedback Changes since v1: Sort the headers in alphabetical order Changes since RFC: Use a DT entry for the ROM area while specifying it as syscon. Version 9 patches can be found here https://lkml.org/lkml/2015/8/12/530 Version 8 patches can be found here https://lkml.org/lkml/2015/8/10/566 Version 7 patches can be found here https://lkml.org/lkml/2015/8/6/440 Version 6 RFC patches can be found here http://lkml.iu.edu/hypermail/linux/kernel/1506.2/05123.html Version 5 of the patchset can be found here http://lkml.iu.edu/hypermail/linux/kernel/1506.0/03787.html Version 4 of the patchset can be found here https://lkml.org/lkml/2015/5/26/199 Version 3 of the patchset can be found here http://www.spinics.net/lists/arm-kernel/msg420847.html Version 2 of the patchset can be found here http://www.spinics.net/lists/devicetree/msg80654.html Version 1 of the patchset can be found here http://www.spinics.net/lists/devicetree/msg80257.html The RFC version can be found here https://lkml.org/lkml/2015/5/11/13 Thanks & Regards, Sanchayan Maity. Sanchayan Maity (4): clk: clk-vf610: Add clock for Vybrid OCOTP controller ARM: dts: vfxxx: Add OCOTP node drivers: nvmem: Add Vybrid OCOTP support nvmem: Add DT binding documentation for Vybrid OCOTP driver .../devicetree/bindings/nvmem/vf610-ocotp.txt | 19 ++ arch/arm/boot/dts/vfxxx.dtsi | 8 + drivers/clk/imx/clk-vf610.c | 1 + drivers/nvmem/Kconfig | 10 + drivers/nvmem/Makefile | 2 + drivers/nvmem/vf610-ocotp.c | 302 +++++++++++++++++++++ include/dt-bindings/clock/vf610-clock.h | 3 +- 7 files changed, 344 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt create mode 100644 drivers/nvmem/vf610-ocotp.c -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
