Re: [PATCH v2 6/8] pinctrl: freescale: imx: add shared input select reg support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Sep 01, 2015 at 05:49:11PM -0500, Adrian Alonso wrote:
> - Add shared input select register support
> - imx7d has two iomux controllers iomuxc and iomuxc-lpsr
>   which share select_input register for daisy chain settings
> 
> Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx>
> ---
> Changes for V2: Resend
> 
>  drivers/pinctrl/freescale/pinctrl-imx.c | 28 +++++++++++++++++++++++++++-
>  drivers/pinctrl/freescale/pinctrl-imx.h |  1 +
>  2 files changed, 28 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
> index 9f019be..597319d 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx.c
> +++ b/drivers/pinctrl/freescale/pinctrl-imx.c
> @@ -18,6 +18,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/of_address.h>
>  #include <linux/pinctrl/machine.h>
>  #include <linux/pinctrl/pinconf.h>
>  #include <linux/pinctrl/pinctrl.h>
> @@ -39,6 +40,7 @@ struct imx_pinctrl {
>  	struct device *dev;
>  	struct pinctrl_dev *pctl;
>  	void __iomem *base;
> +	void __iomem *input_sel_base;
>  	const struct imx_pinctrl_soc_info *info;
>  };
>  
> @@ -254,7 +256,12 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
>  			 * Regular select input register can never be at offset
>  			 * 0, and we only print register value for regular case.
>  			 */
> -			writel(pin->input_val, ipctl->base + pin->input_reg);
> +			if (info->flags & SHARE_INPUT_SELECT_REG)

This can be replaced by a NULL checking on input_sel_base.

> +				writel(pin->input_val, ipctl->input_sel_base +
> +						pin->input_reg);
> +			else
> +				writel(pin->input_val, ipctl->base +
> +						pin->input_reg);
>  			dev_dbg(ipctl->dev,
>  				"==>select_input: offset 0x%x val 0x%x\n",
>  				pin->input_reg, pin->input_val);
> @@ -690,6 +697,8 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev,
>  int imx_pinctrl_probe(struct platform_device *pdev,
>  		      struct imx_pinctrl_soc_info *info)
>  {
> +	struct device_node *dev_np = pdev->dev.of_node;
> +	struct device_node *np;
>  	struct imx_pinctrl *ipctl;
>  	struct resource *res;
>  	int ret;
> @@ -715,6 +724,23 @@ int imx_pinctrl_probe(struct platform_device *pdev,
>  	if (IS_ERR(ipctl->base))
>  		return PTR_ERR(ipctl->base);
>  
> +	if (info->flags & SHARE_INPUT_SELECT_REG) {
> +		np = of_get_child_by_name(dev_np->parent, "iomuxc");

This doesn't scale well.  First of all, we do not generally recommend
searching node by name, because most of time node name is not enforced
to be stable, and some nodes are named quite arbitrarily.  Secondly, we
do not know if the hardware people will move select_input registers to
somewhere else than IOMUXC in the future.

Hence, I suggest you have a device tree phandle pointing the device
where select_input registers are located.  In that case, flag
SHARE_INPUT_SELECT_REG can even be saved completely.

> +		if (np) {
> +			ipctl->input_sel_base = of_iomap(np, 0);
> +			if (IS_ERR(ipctl->input_sel_base)) {
> +				of_node_put(np);
> +				dev_err(&pdev->dev,
> +				       "iomuxc base address not found\n");
> +				return PTR_ERR(ipctl->input_sel_base);
> +			}
> +		} else {
> +			dev_err(&pdev->dev, "iomuxc device node not foud\n");

s/foud/found

Shawn

> +			return -EINVAL;
> +		}
> +		of_node_put(np);
> +	}
> +
>  	imx_pinctrl_desc.name = dev_name(&pdev->dev);
>  	imx_pinctrl_desc.pins = info->pins;
>  	imx_pinctrl_desc.npins = info->npins;
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
> index 67c07c2..d11a827 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx.h
> +++ b/drivers/pinctrl/freescale/pinctrl-imx.h
> @@ -86,6 +86,7 @@ struct imx_pinctrl_soc_info {
>  
>  #define SHARE_MUX_CONF_REG	0x1
>  #define ZERO_OFFSET_VALID	0x2
> +#define SHARE_INPUT_SELECT_REG	0x4
>  
>  #define NO_MUX		0x0
>  #define NO_PAD		0x0
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux