On 20/08/15 20:38, Vladimir Barinov wrote: > These bindings can be used to register Holt HI-8435 threshold detector > > Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx> This is fine and trivial enough that I am not going to need a device tree ack (not that I'd complain if one showed up :) Will pick it up with the driver.. > --- > Changes in version 2: > - renamed file name hi-843x.txt to hi8435.txt > - removed hi-8436,hi-8436,hi-8437 > - removed holt,debounce-soft field > - renamed holt,debounc-soft-delay to holt,debounce-interval > - renamed mr-gpio to reset-gpios > Changes in version 3: > - none > Changes in version 4: > - removed debounce_interval property > - removed reset-gpios to use GPIO descriptor API > > .../devicetree/bindings/iio/adc/hi8435.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/hi8435.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt > new file mode 100644 > index 0000000..3b0348c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/hi8435.txt > @@ -0,0 +1,21 @@ > +Holt Integrated Circuits HI-8435 threshold detector bindings > + > +Required properties: > + - compatible: should be "holt,hi8435" > + - reg: spi chip select number for the device > + > +Recommended properties: > + - spi-max-frequency: definition as per > + Documentation/devicetree/bindings/spi/spi-bus.txt > + > +Optional properties: > + - gpios: GPIO used for controlling the reset pin > + > +Example: > +sensor@0 { > + compatible = "holt,hi8435"; > + reg = <0>; > + gpios = <&gpio6 1 0>; > + > + spi-max-frequency = <1000000>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html