[ + device tree folks ] Hi Sascha, When introducing a new binding, it is a good idea to get reviews from the device tree maintainers. I've added a few folks here. Please keep them in the loop for future postings. Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> writes: > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > Reviewed-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx> Please add a commit log. > --- > .../bindings/thermal/mediatek-thermal.txt | 38 ++++++++++++++++++++++ > include/dt-bindings/thermal/mt8173.h | 13 ++++++++ > 2 files changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > create mode 100644 include/dt-bindings/thermal/mt8173.h > > diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > new file mode 100644 > index 0000000..1697375 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > @@ -0,0 +1,38 @@ > +* Mediatek Thermal > + > +This describes the device tree binding for the Mediatek thermal controller > +which measures the on-SoC temperatures. This device does not have its own ADC, > +instead it directly controls the AUXADC via AHB bus accesses. For this reason > +this device needs phandles to the AUXADC. Also it controls a mux in the > +apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS > +is also needed. > + > +Required properties: > +- compatible: "mediatek,mt8173-thermal" > +- reg: Address range of the thermal controller > +- interrupts: IRQ for the thermal controller > +- clocks, clock-names: Clocks needed for the thermal controller. required > + clocks are: > + "therm": Main clock needed for register access > + "auxadc": The AUXADC clock > +- resets: Reference to the reset controller controlling the thermal controller. > +- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses > +- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller. > +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. See > + include/dt-bindings/thermal/mt8173.h for valid sensor > + numbers. > + > +Example: > + > + thermal: thermal@1100b000 { > + #thermal-sensor-cells = <1>; > + compatible = "mediatek,mt8173-thermal"; > + reg = <0 0x1100b000 0 0x1000>; > + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; > + clock-names = "therm", "auxadc"; > + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; > + reset-names = "therm"; > + mediatek,auxadc = <&auxadc>; > + mediatek,apmixedsys = <&apmixedsys>; > + }; > diff --git a/include/dt-bindings/thermal/mt8173.h b/include/dt-bindings/thermal/mt8173.h > new file mode 100644 > index 0000000..692e74c > --- /dev/null > +++ b/include/dt-bindings/thermal/mt8173.h > @@ -0,0 +1,13 @@ > +/* > + * This header provides constants for mediatek,mt8173-thermal > + */ > + > +#ifndef _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H > +#define _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H > + > +#define MT8173_THERMAL_ZONE_CA53 0 > +#define MT8173_THERMAL_ZONE_CA57 1 > +#define MT8173_THERMAL_ZONE_GPU 2 > +#define MT8173_THERMAL_ZONE_CORE 3 > + > +#endif /* _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H */ The constants in this include are not used in the patchset. Please drop this hunk and introduce it when you use it. Thanks, Punit -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html