ST's platforms often have multiple co-processors (usually ST40s or ST231s)
on-board. This provides the Linux-side infrastructure to flash and boot
them successfully.
This set has been tested on an STiH410-B2120.
Lee Jones (4):
remoteproc: dt: Provide bindings for ST's Remote Processor Controller
driver
remoteproc: Supply controller driver for ST's Remote Processors
ARM: STiH407: Add nodes for RemoteProc
remoteproc: debugfs: Add ability to boot remote processor using
debugfs
.../devicetree/bindings/remoteproc/st-rproc.txt | 38 +++
arch/arm/boot/dts/stih407-family.dtsi | 48 ++++
drivers/remoteproc/Kconfig | 9 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/remoteproc_debugfs.c | 25 ++
drivers/remoteproc/st_remoteproc.c | 300 +++++++++++++++++++++
6 files changed, 421 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
create mode 100644 drivers/remoteproc/st_remoteproc.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
