Hi,
this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
dra72-evm and am57xx-beagle-x15 boards.
In these board McASP3 is connected to the codec and for the McASP3 we needed to
have the DMA crossbar in place since the request lines are not mapped by
default.
Regars,
Peter
---
Peter Ujfalusi (11):
ARM: OMAP: DRA7: hwmod: Add data for McASP3
ARM: DTS: dra7: Add McASP3 node
ARM: DTS: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw
ARM: DTS: dra7-evm: Add fixed regulator to be used by aic3106's DVDD
ARM: DTS: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus
ARM: DTS: dra7-evm: Audio support
ARM: DTS: dra72-evm: Add fixed regulator representing DVDD supply for
aic3106
ARM: DTS: dra72-evm: Add gpio hog for vin6_sel_s0 to select audio
ARM: DTS: dra72-evm: Audio support
ARM: DTS: am57xx-beagle-x15: Add fixed regulator for aic3104's DVDD
ARM: DTS: am57xx-beagle-x15: Enable analog audio support
arch/arm/boot/dts/am57xx-beagle-x15.dts | 95 ++++++++++++++++++++
arch/arm/boot/dts/dra7-evm.dts | 142 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/dra7.dtsi | 15 ++++
arch/arm/boot/dts/dra72-evm.dts | 138 +++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 41 +++++++++
5 files changed, 428 insertions(+), 3 deletions(-)
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
