Changes for v4: -Call esdhc_set_strobe_dll() only when device clock is over 100MHz in HS400 mode. -Add detail description of tuning-step. -Change to default watermark level and burst length for all imx SoC, not only imx7d. Haibo Chen (6): mmc: sdhci-esdhc-imx: add imx7d support and support HS400 mmc: sdhci-esdhc-imx: add tuning-step seting support mmc: sdhci-esdhc-imx: add compatible string in bingding doc ARM: dts: imx7d-sdb: add eMMC5.0 support mmc: sdhci-esdhc-imx: change default watermark level and burst length mmc: sdhci-esdhc-imx: set back the burst_length_enable bit to 1 .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 6 ++ arch/arm/boot/dts/imx7d-sdb.dts | 13 +++ drivers/mmc/host/sdhci-esdhc-imx.c | 109 ++++++++++++++++++++- include/linux/platform_data/mmc-esdhc-imx.h | 1 + 4 files changed, 128 insertions(+), 1 deletion(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html