On 07/28/2015 11:37 PM, Dmitry Torokhov wrote:
> On Tue, Jul 28, 2015 at 11:16:44PM +0530, R, Vignesh wrote:
>> Hi,
>>
>> On 7/28/2015 10:53 PM, Dmitry Torokhov wrote:
>>> On Tue, Jul 28, 2015 at 06:53:52PM +0530, Vignesh R wrote:
>>>> Hi Dmitry,
>>>>
>>>> On 07/25/2015 01:46 AM, Dmitry Torokhov wrote:
>>>>> On Fri, Jul 24, 2015 at 12:26:19PM -0700, Dmitry Torokhov wrote:
>>>>>> On Fri, Jul 24, 2015 at 02:14:57PM -0500, Rob Herring wrote:
>>>>>>> On Fri, Jul 24, 2015 at 1:26 PM, Dmitry Torokhov
>>>>>>> <dmitry.torokhov@xxxxxxxxx> wrote:
>>>>>>>> Sometimes drivers might wish to transition from index-based to named
>>>>>>>> interrupt descriptions. To aid in decision-making when parsing device
>>>>>>>> tree data let's provide a helper that will indicate the scheme that is
>>>>>>>> being used.
>>>>>>>
>>>>>>> Generally, IRQs are retrieved by platform_get_irq or
>>>>>>> platform_get_irq_byname. Drivers should not call the of_irq_*
>>>>>>> functions directly in most cases.
>>>>>>
>>>>>> That would be true for platform drivers, but not all devices are
>>>>>> platform devices.
>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
>>>>>>>> ---
>>>>>>>>
>>>>>>>> The intent is to it like this:
>>>>>>>>
>>>>>>>> if (of_has_named_irqs(np) {
>>>>>>>> /* Wake IRQ is optional */
>>>>>>>> dev->wakeirq = of_irq_get_byname(np, "wakeup");
>>>>>>>> if (dev->wakeirq < 0 && dev->wakeirq != -ENODATA)
>>>>>>>> return dev->wakeirq;
>>>>>>>> }
>>>>>>>
>>>>>>> of_irq_get_byname will already return an error if the property is not
>>>>>>> present. Use that.
>>>>>>
>>>>>> I do not like that it returns -EINVAL when property is missing, can we
>>>>>> change it to return -ENODATA (so it is the same as when the property is
>>>>>> defined but such name is missing)?
>>>>>
>>>>> So here is what I had in mind.. It is based on recent patch by Vignesh
>>>>> for pixcir touchscreen, but I think it should be made available to all
>>>>> I2C devices. Completely untested at the moment.
>>>>>
>>>>
>>>> Thanks for the patch! I tested this on am437x-gp-evm and the
>>>> suspend/resume worked fine (below patch + $subject patch). I was able to
>>>> wake the system from low power state using touchscreen. Also verified
>>>> module insertion and removal. One comment though, please see below.
>>>>
>>>>> ---
>>>>> drivers/i2c/i2c-core.c | 43 +++++++++++++++++++++++++++++++++++++------
>>>>> 1 file changed, 37 insertions(+), 6 deletions(-)
>>>>>
>>>>> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
>>>>> index e6d4935..3971461 100644
>>>>> --- a/drivers/i2c/i2c-core.c
>>>>> +++ b/drivers/i2c/i2c-core.c
>>>>> @@ -47,6 +47,7 @@
>>>>> #include <linux/rwsem.h>
>>>>> #include <linux/pm_runtime.h>
>>>>> #include <linux/pm_domain.h>
>>>>> +#include <linux/pm_wakeirq.h>
>>>>> #include <linux/acpi.h>
>>>>> #include <linux/jump_label.h>
>>>>> #include <asm/uaccess.h>
>>>>> @@ -631,6 +632,7 @@ static int i2c_device_probe(struct device *dev)
>>>>> {
>>>>> struct i2c_client *client = i2c_verify_client(dev);
>>>>> struct i2c_driver *driver;
>>>>> + int wakeirq = 0;
>>>>> int status;
>>>>>
>>>>> if (!client)
>>>>> @@ -639,11 +641,13 @@ static int i2c_device_probe(struct device *dev)
>>>>> if (!client->irq) {
>>>>> int irq = -ENOENT;
>>>>>
>>>>> - if (dev->of_node)
>>>>> - irq = of_irq_get(dev->of_node, 0);
>>>>> - else if (ACPI_COMPANION(dev))
>>>>> + if (dev->of_node) {
>>>>> + irq = of_has_named_irqs(dev->of_node) ?
>>>>> + of_irq_get_byname(dev->of_node, "irq") :
>>>>> + of_irq_get(dev->of_node, 0);
>>>>> + } else if (ACPI_COMPANION(dev)) {
>>>>> irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
>>>>> -
>>>>> + }
>>>>> if (irq == -EPROBE_DEFER)
>>>>> return irq;
>>>>> if (irq < 0)
>>>>> @@ -652,6 +656,15 @@ static int i2c_device_probe(struct device *dev)
>>>>> client->irq = irq;
>>>>> }
>>>>>
>>>>> + if (dev->of_node && of_has_named_irqs(dev->of_node)) {
>>>>> + wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
>>>>> + if (wakeirq < 0) {
>>>>> + if (wakeirq != -ENODATA)
>>>>> + return wakeirq;
>>>>> + wakeirq = 0;
>>>>> + }
>>>>> + }
>>>>> +
>>>>> driver = to_i2c_driver(dev->driver);
>>>>> if (!driver->probe || !driver->id_table)
>>>>> return -ENODEV;diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> index 8f3e243a62bf..6bd1d1ca9883 100644
>> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
>> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> @@ -365,7 +365,6 @@ static int __maybe_unused
>> pixcir_i2c_ts_suspend(struct device *dev)
>> }
>> }
>>
>> - enable_irq_wake(client->irq);
>> } else if (input->users) {
>> ret = pixcir_stop(ts);
>> }
>> @@ -386,7 +385,6 @@ static int __maybe_unused
>> pixcir_i2c_ts_resume(struct device *dev)
>> mutex_lock(&input->mutex);
>>
>> if (device_may_wakeup(&client->dev)) {
>> - disable_irq_wake(client->irq);
>>
>> if (!input->users) {
>> ret = pixcir_stop(ts);
>> @@ -464,7 +462,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client
>> *client,
>> struct pixcir_i2c_ts_data *tsdata;
>> struct input_dev *input;
>> int error;
>> -
>> +printk("PROBING PIXCIR\n");
>> if (np && !pdata) {
>> pdata = pixcir_parse_dt(dev);
>> if (IS_ERR(pdata))
>> @@ -562,14 +560,6 @@ static int pixcir_i2c_ts_probe(struct i2c_client
>> *client,
>> return error;
>>
>> i2c_set_clientdata(client, tsdata);
>> - device_init_wakeup(&client->dev, 1);
>> -
>> - return 0;
>> -}
>> -
>> -static int pixcir_i2c_ts_remove(struct i2c_client *client)
>> -{
>> - device_init_wakeup(&client->dev, 0);
>>
>> return 0;
>> }
>> @@ -608,7 +598,6 @@ static struct i2c_driver pixcir_i2c_ts_driver = {
>> .of_match_table = of_match_ptr(pixcir_of_match),
>> },
>> .probe = pixcir_i2c_ts_probe,
>> - .remove = pixcir_i2c_ts_remove,
>> .id_table = pixcir_i2c_ts_id,
>> };
>>>>> @@ -659,20 +672,34 @@ static int i2c_device_probe(struct device *dev)
>>>>> if y i2c(!device_can_wakeup(&client->dev))
>>>>> device_init_wakeup(&client->dev,
>>>>> client->flags & I2C_CLIENT_WAKE);
>>>>> +
>>>>> + status = wakeirq > 0 ?
>>>>> + dev_pm_set_dedicated_wake_irq(dev, wakeirq) :
>>>>> + (client->irq > 0 ?
>>>>> + dev_pm_set_wake_irq(dev, client->irq) : 0);
>>>>
>>>> Above code tries to register wakeirq irrespective of whether the device
>>>> is specified as wakeup-source in the dt or not. Hence, I see warn
>>>> messages from every i2c device that has irq line but hasn't declared
>>>> itself as wakeup-source:
>>>> For example tps is on i2c:
>>>> [ 1.961613] tps65218 0-0024: forgot to call call device_init_wakeup?
>>>> [ 1.968340] tps65218 0-0024: failed to set up wakeup irq
>>>>
>>>> May be you can register wakeup-source only if I2C_CLIENT_WAKE flag is
>>>> set in client->flags?
>>>
>>> Makes sense, I'll prepare a new version.
>>>
>>> Just to confirm: do you see any issues with these 2 patches if you do
>>> not modify the drivers to drop calls enable_irq_wake() from them?
>>
>> No, I didn't test w/o dropping enable_irq_wake() calls. I will do that
>> tomo. Is this to verify that these 2 patches can be added w/o dropping
>> enable_irq_wake() from other i2c drivers currently using them?
>
> Yes.
Tested these 2 patches with enable/disable_irq_wake() calls in pixcir
driver and I did not see any issues.
--
Regards
Vignesh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
