Hi Moritz,
On Fri, 2015-07-24 at 05:21PM -0700, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
> ---
> Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>
> diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> new file mode 100644
> index 0000000..ac4499e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> @@ -0,0 +1,13 @@
> +Xilinx Zynq PL Reset Manager
> +
> +Required properties:
> +- compatible: "xlnx,zynq-reset-pl"
> +- syscon <&slcr>;
> +- #reset-cells: 1
> +
> +Example:
> + rstc: rstc@240 {
> + #reset-cells = <1>;
> + compatible = "xlnx,zynq-reset-pl";
> + syscon = <&slcr>;
> + };
I think you also have to add the outputs and make them part of the
binding. Otherwise you'd have to read the implementation to find
out what device should be hooked up to which output of the reset-controller.
Sören
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
