Hi all,
I went ahead and generalized it to support all the resets I could
find in the TRM. I don't know if all of them are sensible, so we
need to carfully double check that. I also tried to add in the stuff
that was pointed out in v1.
If this looks good enough for a patch let me know.
Thanks for your feedback,
Moritz
Moritz Fischer (3):
docs: dts: Added documentation for Xilinx Zynq Reset Controller
bindings.
dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
.../devicetree/bindings/reset/zynq-reset-pl.txt | 13 ++
arch/arm/boot/dts/zynq-7000.dtsi | 43 ++++++-
arch/arm/boot/dts/zynq-parallella.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 2 +-
arch/arm/boot/dts/zynq-zc706.dts | 2 +-
arch/arm/boot/dts/zynq-zed.dts | 2 +-
arch/arm/boot/dts/zynq-zybo.dts | 2 +-
drivers/reset/Makefile | 1 +
drivers/reset/reset-zynq.c | 142 +++++++++++++++++++++
include/dt-bindings/reset/xlnx,zynq-reset.h | 94 ++++++++++++++
10 files changed, 297 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
create mode 100644 drivers/reset/reset-zynq.c
create mode 100644 include/dt-bindings/reset/xlnx,zynq-reset.h
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
