Re: [PATCH 3/6] mailbox: Add support for ST's Mailbox IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Let's carry on the conversation here, rather than submitting my fixed
up patch.  Once agreed, I will re-send.

> On Fri, Jul 17, 2015 at 5:34 PM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > ST's platforms currently support a maximum of 5 Mailboxes, one for
> > each of the supported co-processors situated on the platform.  Each
> > Mailbox is divided up into 4 instances which consist of 32 channels.
> > Messages are passed between the application and co-processors using
> > shared memory areas.  It is the Client's responsibility to manage
> > these areas.
> >
> Thanks. It's a lot better than the old driver. However a few nits as usual :)
> 
> > +
> > +#define STI_MBOX_INST_MAX      4      /* RAM saving: Max supported instances */
> >
> Above you say 5 instances. Another u32 doesn't cost much.

This should stay the same.  There are 4 instances.

> > +#define STI_MBOX_CHAN_MAX      20     /* RAM saving: Max supported channels  */
> > +
> This assumption is reasonable.
> 
> > +
> > +static void sti_mbox_enable_channel(struct mbox_chan *chan)
> > +{
> > +       struct sti_channel *chan_info = chan->con_priv;
> > +       struct sti_mbox_device *mdev = chan_info->mdev;
> > +       struct sti_mbox_pdata *pdata = dev_get_platdata(mdev->dev);
> > +       unsigned int instance = chan_info->instance;
> > +       unsigned int channel = chan_info->channel;
> > +       unsigned long flags;
> > +       void __iomem *base;
> > +
> > +       base = mdev->base + (instance * sizeof(u32));
> > +
> Maybe have something simpler like MBOX_BASE(instance)? Or some inline
> function to avoid this 5-lines ritual?

I've checked and we can't do this, as the we need most (all?) of the
intermediary variables too.  No ritual just to get the final variable
for instance.

> > +       spin_lock_irqsave(&sti_mbox_chan_lock, flags);
> > +       mdev->enabled[instance] |= BIT(channel);
> > +       writel_relaxed(BIT(channel), base + pdata->ena_set);
> > +       spin_unlock_irqrestore(&sti_mbox_chan_lock, flags);
> >
> You don't need locking for SET/CLR type registers which are meant for
> when they could be accessed by processors that can not share a lock.
> So maybe drop the lock here and elsewhere.

>From what I can gather, I think we need this locking.  What happens if
we get scheduled between setting the enabled bit in our cache and
actually setting the ena_set bit?  We would be out of sync.

> However, you need some mechanism to check if you succeeded 'owning'
> the channel by reading back what you write to own the channel (not
> sure which is that register here). Usually we need that action and
> verification when we assign a channel to some user.

I don't think we need to do that with this driver.  All of the
allocation is controlled from within this code base.  The channels are
pre-allocated and written into the co-proc's Firmware.

> > +static int sti_mbox_send_data(struct mbox_chan *chan, void *data)
> > +{
> > +       struct sti_channel *chan_info = chan->con_priv;
> > +       struct sti_mbox_device *mdev = chan_info->mdev;
> > +       struct sti_mbox_pdata *pdata = dev_get_platdata(mdev->dev);
> > +       unsigned int instance = chan_info->instance;
> > +       unsigned int channel = chan_info->channel;
> > +       void __iomem *base;
> > +
> > +       if (!sti_mbox_tx_is_ready(chan))
> > +               return -EBUSY;
> This is the first thing I look out for in every new driver :)  this
> check is unnecessary.

I see what you mean now.  I will remove this check.

> > +static void sti_mbox_shutdown_chan(struct mbox_chan *chan)
> > +{
> > +       struct sti_channel *chan_info = chan->con_priv;
> > +       struct mbox_controller *mbox = chan_info->mdev->mbox;
> > +       int i;
> > +
> > +       for (i = 0; i < mbox->num_chans; i++)
> > +               if (chan == &mbox->chans[i])
> > +                       break;
> > +
> > +       if (mbox->num_chans == i) {
> > +               dev_warn(mbox->dev, "Request to free non-existent channel\n");
> > +               return;
> > +       }
> > +
> > +       sti_mbox_disable_channel(chan);
> > +       sti_mbox_clear_irq(chan);
> > +
> > +       /* Reset channel */
> > +       memset(chan, 0, sizeof(*chan));
> > +       chan->mbox = mbox;
> > +       chan->txdone_method = TXDONE_BY_POLL;
> >
> No please. mbox_chan is owned by the API. At most you could clear con_priv.

Removed.

> > +static struct mbox_chan *sti_mbox_xlate(struct mbox_controller *mbox,
> > +                                       const struct of_phandle_args *spec)
> > +{
> > +       struct sti_mbox_device *mdev = dev_get_drvdata(mbox->dev);
> > +       struct sti_mbox_pdata *pdata = dev_get_platdata(mdev->dev);
> > +       struct sti_channel *chan_info;
> > +       struct mbox_chan *chan = NULL;
> > +       unsigned int instance  = spec->args[0];
> > +       unsigned int channel   = spec->args[1];
> > +       unsigned int direction = spec->args[2];
> > +       int i;
> > +
> > +       /* Bounds checking */
> > +       if (instance >= pdata->num_inst || channel  >= pdata->num_chan) {
> > +               dev_err(mbox->dev,
> > +                       "Invalid channel requested instance: %d channel: %d\n",
> > +                       instance, channel);
> > +               return NULL;
> > +       }
> > +
> > +       for (i = 0; i < mbox->num_chans; i++) {
> > +               chan_info = mbox->chans[i].con_priv;
> > +
> > +               /* Is requested channel free? */
> > +               if (direction != MBOX_LOOPBACK &&
> > +                   chan_info &&
> > +                   mbox->dev == chan_info->mdev->dev &&
> > +                   instance == chan_info->instance &&
> > +                   channel == chan_info->channel) {
> > +                       dev_err(mbox->dev, "Channel in use\n");
> > +                       return NULL;
> > +               }
> > +
> > +               /* Find the first free slot */
> > +               if (!chan && !chan_info)
> > +                       chan = &mbox->chans[i];
>         shouldn't it break out of loop here?

I checked that and we don't.  We need to check all of the channels do
wee if we have double allocated.  If we have, NULL is returned from
above.

I have; however, updated the comment above for clarity.

> > +       }
> > +
> Doesn't mbox->chans[i].con_priv need some locking here?

Not that I can see.  Would you mind explaining further please?

> > +static const struct sti_mbox_pdata mbox_stih407_pdata = {
> > +       .num_inst       = 4,
> > +       .num_chan       = 32,
> > +       .irq_val        = 0x04,
> > +       .irq_set        = 0x24,
> > +       .irq_clr        = 0x44,
> > +       .ena_val        = 0x64,
> > +       .ena_set        = 0x84,
> > +       .ena_clr        = 0xa4,
> >
> Register offsets are parameters of the controller, and also these look
> ugly. Please make these #define's

These are now #defined.

> > +static int __init sti_mbox_init(void)
> > +{
> > +       return platform_driver_register(&sti_mbox_driver);
> > +}
> > +
> > +static void __exit sti_mbox_exit(void)
> > +{
> > +       platform_driver_unregister(&sti_mbox_driver);
> > +}
> > +
> > +postcore_initcall(sti_mbox_init);
> >
> This seems fragile. Shouldn't the users defer probe if they don't get a channel?

This has been converted to module_platform_driver()

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux