ST's platforms currently support a maximum of 5 Mailboxes, one for each of the supported co-processors situated on the platform. Each Mailbox is divided up into 4 instances which consist of 32 channels. Messages are passed between the application and co-processors using shared memory areas. Also included in the set is an example Client which should be generic enough to use as a testing environment for all Mailbox IPs which use shared memory to pass messages. With a small change, it should also be able to test more extravagant implementations too. Lee Jones (6): mailbox: dt: Supply bindings for ST's Mailbox IP mailbox: dt-bindings: Add shared [driver <=> device tree] defines mailbox: Add support for ST's Mailbox IP ARM: STi: stih407-family: Add nodes for Mailbox mailbox: Add generic mechanism for testing Mailbox Controllers ARM: STi: DT: STiH407: Enable Mailbox testing facility .../devicetree/bindings/mailbox/sti-mailbox.txt | 53 ++ arch/arm/boot/dts/stih407-family.dtsi | 40 ++ drivers/mailbox/Kconfig | 14 + drivers/mailbox/Makefile | 4 + drivers/mailbox/mailbox-sti.c | 562 +++++++++++++++++++++ drivers/mailbox/mailbox-test.c | 210 ++++++++ include/dt-bindings/mailbox/mailbox.h | 14 + 7 files changed, 897 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/sti-mailbox.txt create mode 100644 drivers/mailbox/mailbox-sti.c create mode 100644 drivers/mailbox/mailbox-test.c create mode 100644 include/dt-bindings/mailbox/mailbox.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html