On Thu, 2015-07-16 at 23:21 +0800, Daniel Kurtz wrote: > On Thu, Jul 16, 2015 at 3:17 PM, YH Huang <yh.huang@xxxxxxxxxxxx> wrote: > > On Thu, 2015-07-16 at 14:54 +0800, Daniel Kurtz wrote: > >> On Thu, Jul 16, 2015 at 1:38 PM, YH Huang <yh.huang@xxxxxxxxxxxx> wrote: > >> > On Wed, 2015-07-15 at 23:59 +0800, YH Huang wrote: > >> >> On Mon, 2015-07-13 at 18:19 +0800, Daniel Kurtz wrote: > >> >> > On Mon, Jul 13, 2015 at 5:04 PM, YH Huang <yh.huang@xxxxxxxxxxxx> wrote: > >> >> > > +#ifdef CONFIG_PM_SLEEP > >> >> > > +static int mtk_disp_pwm_suspend(struct device *dev) > >> >> > > +{ > >> >> > > + struct mtk_disp_pwm *mdp = dev_get_drvdata(dev); > >> >> > > + > >> >> > > + clk_disable_unprepare(mdp->clk_main); > >> >> > > + clk_disable_unprepare(mdp->clk_mm); > >> >> > > + > >> >> > > + return 0; > >> >> > > +} > >> >> > > + > >> >> > > +static int mtk_disp_pwm_resume(struct device *dev) > >> >> > > +{ > >> >> > > + struct mtk_disp_pwm *mdp = dev_get_drvdata(dev); > >> >> > > + int ret; > >> >> > > + > >> >> > > + ret = clk_prepare_enable(mdp->clk_main); > >> >> > > + if (ret < 0) > >> >> > > + return ret; > >> >> > > + > >> >> > > + ret = clk_prepare_enable(mdp->clk_mm); > >> >> > > + if (ret < 0) { > >> >> > > + clk_disable_unprepare(mdp->clk_main); > >> >> > > + return ret; > >> >> > > + } > >> >> > > + > >> >> > > >> >> > Don't you also have to restore the PWM rate and frequency? > >> >> > > >> >> > Is it possible to save power at runtime by leaving mdp->clk_mm enabled > >> >> > (to generate the PWM signal), but disable mdp->clk_main (clock > >> >> > required to access PWM registers)? > >> >> > >> >> The pwm-backlight driver will restore the data. > >> >> > >> >> After I try to disable anyone of the two clocks at runtime, the > >> >> backlight doesn't work well(no immediate update or losing backlight). > >> >> So we need to keep both clock enabled. > > Do you mean you see backlight glitch because the clocks / backlight > were *already on* during the first config (Perhaps left on by the > bootloader)? > I don't know how to solve that problem. > Maybe Thierry does. > > In any case, this is a minor issue; we really shouldn't hold up > landing the driver to optimize when the clocks are enabled/disabled > :-). I'm happy enough with what you have in this patch. Sorry for my terrible expression. Let me try again. 1. We want to disable unnecessary clock at runtime. But, I get backlight glitch when I disable clk_main or clk_mm in mtk_disp_pwm_config(). So both clocks are necessary and we don't disable them at runtime. 2. Because pwm-backlight driver calls mtk_disp_pwm_config() before mtk_disp_pwm_enable(), we will lose the first config if clocks are enabled in mtk_disp_pwm_enable(). I prefer to enable clocks in probe function. Samsung did the same way in their pwm driver. Thanks for your kindly suggestions. I will update the patch soon. Regards, YH Huang -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html