10.07.2015 00:15, Florian Fainelli пишет:
On 09/07/15 13:43, Stas Sergeev wrote:
09.07.2015 21:24, Florian Fainelli пишет:
(there is no such thing as linux-net@xxxxxxxxxxxxxxx, please remove it
from your future submissions).
On 09/07/15 10:38, Stas Sergeev wrote:
Currently for fixed-link the link state is always set to UP.
Not quite true, this is always a driver decision to make.
But what about this part of of_mdio.c:of_phy_register_fixed_link():
---
fixed_link_node = of_get_child_by_name(np, "fixed-link");
if (fixed_link_node) {
status.link = 1
---
This seems like a logical consequence of finding a "fixed-link" property
for the DT node of interest. If no such property exist, then we do not
set anything.
This patch introduces the new property 'link' that accepts the
following string arguments: "up", "down" and "auto".
"down" may be needed if the link is physically unconnected.
In which case you probably do not even care about inserting such a
property in the first place, do you? What would be the value of forcibly
having a link permanently down (not counting loopback)?
The DTs have a common parts that are included by other
parts. So if you include the definition of your SoC that have
all ethernets defined, and you only set up the external things
like PHYs, then I would see a potential use for "down".
"down" is equivalent to using a status = "disabled", in fact the latter
is much better since you can even conserve energy and resources by not
enabling something which is not usable.
OK, agree.
So I'll probably go for something like
autoneg = 1 | 0;
This doesn't work.
It appears even if the driver supports it and wants to use it, the
PHY HW may simply not generate the inband status. This is actually
the whole point why we have a regression now. It is _currently_
a driver decision, and that doesn't work for some people.
The point of this patch set is to make it a DT decision instead.
Then, if the in-band status indication is not reliable (which really
should be completely understood),
Agree!
But this is not something I can help with.
Sebastien Rannou reports the problem, please ask him whatever
you see fits to get a better understanding of a problem.
The fact that his HW does not generate the inband status, is
_my own guess_.
you can just ignore the in-band status
and use all the parameter in a 'fixed-link' property, should not we?
I don't think there is any way at all to find out if the inband stat is
usable or not. I think only the user (or manufacturer) can decide
on that. If there is any way to do a guess-work, that would be an
entirely different story.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
