88PM800 family of device supports output of 32KHz clock (low jitter) on CLK32K2/3 pin which can be supplied to other peripherals on the board. This patch adds the devicetree binding to enable this feature. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx> --- Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt index dec842f..ae1311c 100644 --- a/Documentation/devicetree/bindings/mfd/88pm800.txt +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt @@ -9,6 +9,12 @@ Required parent device properties: - #interrupt-cells : should be 1. The cell is the 88pm80x local IRQ number +Optional properties : + - marvell,88pm800-32khz-xolj-out-en : If set, driver will enable low jitter + version of 32Khz clock output on + CLK32K3 - for 88pm800 + CLK32K2 - for 88pm860 + 88pm80x family of devices consists of varied group of sub-devices: Device Supply Names Description -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
