Re: [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 18/06/2015 at 15:05:08 +0200, Cyrille Pitchen wrote :
> ChangeLog
> 
> v2:
> - enhance the documentation of DT bindings and change the way the "ranges"
>   property is used.
> - replace __raw_readl() and __raw_writel() by readl() and writel().
> - change the module license to "GPL" for v2 or later
> - print the selected flexcom mode after the hardware version
> 
> v1:
> This series of patches a support to the Atmel Flexcom, a wrapper which
> integrates an USART, a SPI controller and a TWI controller. Only one
> peripheral can be used at a time. The active function is selected though
> the Flexcom Mode Register.
> 

For the whole set:
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux