On Thu, 18 Jun 2015 15:05:08 +0200 Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx> wrote: > ChangeLog > > v2: > - enhance the documentation of DT bindings and change the way the "ranges" > property is used. > - replace __raw_readl() and __raw_writel() by readl() and writel(). > - change the module license to "GPL" for v2 or later > - print the selected flexcom mode after the hardware version > > v1: > This series of patches a support to the Atmel Flexcom, a wrapper which > integrates an USART, a SPI controller and a TWI controller. Only one > peripheral can be used at a time. The active function is selected though > the Flexcom Mode Register. For the whole series, Acked-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> > > Cyrille Pitchen (2): > mfd: devicetree: add bindings for Atmel Flexcom > mfd: flexcom: add a driver for Atmel Flexible Serial Communication > Unit > > .../devicetree/bindings/mfd/atmel-flexcom.txt | 58 +++++++++++++ > drivers/mfd/Kconfig | 11 +++ > drivers/mfd/Makefile | 1 + > drivers/mfd/atmel-flexcom.c | 97 ++++++++++++++++++++++ > 4 files changed, 167 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > create mode 100644 drivers/mfd/atmel-flexcom.c > -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
