Ping.
Regards,
Punnaiah
On Mon, Jun 8, 2015 at 11:37 PM, Punnaiah Choudary Kalluri
<punnaiah.choudary.kalluri@xxxxxxxxxx> wrote:
> Add driver for arm pl353 static memory controller. This controller is
> used in xilinx zynq soc for interfacing the nand and nor/sram memory
> devices.
>
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
> ---
> Changes in v7:
> - Corrected the kconfig to use tristate selection
> - Corrected the GPL licence ident
> - Added boundary checks for nand timing parameters
> Changes in v6:
> - Fixed checkpatch.pl reported warnings
> Changes in v5:
> - Added pl353_smc_get_clkrate function, made pl353_smc_set_cycles as public
> API
> - Removed nand timing parameter initialization and moved it to nand driver
> Changes in v4:
> - Modified driver to support multiple instances
> - Used sleep instaed of busywait for delay
> Changes in v3:
> - None
> Changes in v2:
> - Since now the timing parameters are in nano seconds, added logic to convert
> them to the cycles
> ---
> drivers/memory/Kconfig | 7 +
> drivers/memory/Makefile | 1 +
> drivers/memory/pl353-smc.c | 559 ++++++++++++++++++++++++++++++++++++++
> include/linux/memory/pl353-smc.h | 37 +++
> 4 files changed, 604 insertions(+), 0 deletions(-)
> create mode 100644 drivers/memory/pl353-smc.c
> create mode 100644 include/linux/memory/pl353-smc.h
>
> diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
> index 868036f..b855cc5 100644
> --- a/drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -92,6 +92,13 @@ config JZ4780_NEMC
> the Ingenic JZ4780. This controller is used to handle external
> memory devices such as NAND and SRAM.
>
> +config PL353_SMC
> + tristate "ARM PL353 Static Memory Controller (SMC) driver"
> + depends on ARM
> + help
> + This driver is for the ARM PL353 Static Memory Controller (SMC)
> + module.
> +
> source "drivers/memory/tegra/Kconfig"
>
> endif
> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
> index b670441..d943700 100644
> --- a/drivers/memory/Makefile
> +++ b/drivers/memory/Makefile
> @@ -14,5 +14,6 @@ obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
> obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
> obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o
> +obj-$(CONFIG_PL353_SMC) += pl353-smc.o
>
> obj-$(CONFIG_TEGRA_MC) += tegra/
> diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
> new file mode 100644
> index 0000000..9cd6e56
> --- /dev/null
> +++ b/drivers/memory/pl353-smc.c
> @@ -0,0 +1,559 @@
> +/*
> + * ARM PL353 SMC Driver
> + *
> + * Copyright (C) 2012 - 2015 Xilinx, Inc.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Currently only a single SMC instance is supported.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/memory/pl353-smc.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +/* Register definitions */
> +#define PL353_SMC_MEMC_STATUS_OFFS 0 /* Controller status reg, RO */
> +#define PL353_SMC_CFG_CLR_OFFS 0xC /* Clear config reg, WO */
> +#define PL353_SMC_DIRECT_CMD_OFFS 0x10 /* Direct command reg, WO */
> +#define PL353_SMC_SET_CYCLES_OFFS 0x14 /* Set cycles register, WO */
> +#define PL353_SMC_SET_OPMODE_OFFS 0x18 /* Set opmode register, WO */
> +#define PL353_SMC_ECC_STATUS_OFFS 0x400 /* ECC status register */
> +#define PL353_SMC_ECC_MEMCFG_OFFS 0x404 /* ECC mem config reg */
> +#define PL353_SMC_ECC_MEMCMD1_OFFS 0x408 /* ECC mem cmd1 reg */
> +#define PL353_SMC_ECC_MEMCMD2_OFFS 0x40C /* ECC mem cmd2 reg */
> +#define PL353_SMC_ECC_VALUE0_OFFS 0x418 /* ECC value 0 reg */
> +
> +/* Controller status register specific constants */
> +#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT 6
> +
> +/* Clear configuration register specific constants */
> +#define PL353_SMC_CFG_CLR_INT_CLR_1 0x10
> +#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1 0x40
> +#define PL353_SMC_CFG_CLR_INT_DIS_1 0x2
> +#define PL353_SMC_CFG_CLR_DEFAULT_MASK (PL353_SMC_CFG_CLR_INT_CLR_1 | \
> + PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \
> + PL353_SMC_CFG_CLR_INT_DIS_1)
> +
> +/* Set cycles register specific constants */
> +#define PL353_SMC_SET_CYCLES_T0_MASK 0xF
> +#define PL353_SMC_SET_CYCLES_T0_SHIFT 0
> +#define PL353_SMC_SET_CYCLES_T1_MASK 0xF
> +#define PL353_SMC_SET_CYCLES_T1_SHIFT 4
> +#define PL353_SMC_SET_CYCLES_T2_MASK 0x7
> +#define PL353_SMC_SET_CYCLES_T2_SHIFT 8
> +#define PL353_SMC_SET_CYCLES_T3_MASK 0x7
> +#define PL353_SMC_SET_CYCLES_T3_SHIFT 11
> +#define PL353_SMC_SET_CYCLES_T4_MASK 0x7
> +#define PL353_SMC_SET_CYCLES_T4_SHIFT 14
> +#define PL353_SMC_SET_CYCLES_T5_MASK 0x7
> +#define PL353_SMC_SET_CYCLES_T5_SHIFT 17
> +#define PL353_SMC_SET_CYCLES_T6_MASK 0xF
> +#define PL353_SMC_SET_CYCLES_T6_SHIFT 20
> +
> +/* Nand timing parameters min and max permitted values */
> +#define PL353_NAND_T0_MIN 0x2
> +#define PL353_NAND_T0_MAX 0xF
> +#define PL353_NAND_T1_MIN 0x2
> +#define PL353_NAND_T1_MAX 0xF
> +#define PL353_NAND_T2_MIN 0x1
> +#define PL353_NAND_T2_MAX 0x7
> +#define PL353_NAND_T3_MIN 0x1
> +#define PL353_NAND_T3_MAX 0x7
> +#define PL353_NAND_T4_MAX 0x7
> +#define PL353_NAND_T5_MAX 0x7
> +#define PL353_NAND_T6_MAX 0xF
> +
> +/* ECC status register specific constants */
> +#define PL353_SMC_ECC_STATUS_BUSY (1 << 6)
> +
> +/* ECC memory config register specific constants */
> +#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC
> +#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2
> +#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0xC
> +
> +#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \
> + (2 << 21)) /* UpdateRegs operation */
> +
> +#define PL353_NAND_ECC_CMD1 ((0x80) | /* Write command */ \
> + (0 << 8) | /* Read command */ \
> + (0x30 << 16) | /* Read End command */ \
> + (1 << 24)) /* Read End command calid */
> +
> +#define PL353_NAND_ECC_CMD2 ((0x85) | /* Write col change cmd */ \
> + (5 << 8) | /* Read col change cmd */ \
> + (0xE0 << 16) | /* Read col change end cmd */ \
> + (1 << 24)) /* Read col change end cmd valid */
> +#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ)
> +
> +/**
> + * struct pl353_smc_data - Private smc driver structure
> + * @base: SMC virtual register space
> + * @devclk: Pointer to the peripheral clock
> + * @aperclk: Pointer to the APER clock
> + */
> +struct pl353_smc_data {
> + void __iomem *base;
> + struct clk *memclk;
> + struct clk *aclk;
> +};
> +
> +/**
> + * pl353_smc_set_buswidth - Set memory buswidth
> + * @dev: Pointer to the device struct
> + * @bw: Memory buswidth (8 | 16)
> + * Return: 0 on success or negative errno.
> + */
> +int pl353_smc_set_buswidth(struct device *dev, unsigned int bw)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + if (bw != PL353_SMC_MEM_WIDTH_8 && bw != PL353_SMC_MEM_WIDTH_16)
> + return -EINVAL;
> +
> + writel(bw, pl353_smc->base + PL353_SMC_SET_OPMODE_OFFS);
> + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc->base +
> + PL353_SMC_DIRECT_CMD_OFFS);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth);
> +
> +/**
> + * pl353_smc_set_cycles - Set memory timing parameters
> + * @dev: Pointer to the device struct
> + * @t0: t_rc read cycle time
> + * @t1: t_wc write cycle time
> + * @t2: t_rea/t_ceoe output enable assertion delay
> + * @t3: t_wp write enable deassertion delay
> + * @t4: t_clr/t_pc page cycle time
> + * @t5: t_ar/t_ta ID read time/turnaround time
> + * @t6: t_rr busy to RE timing
> + * Return: 0 on success or negative errno.
> + *
> + * Sets NAND chip specific timing parameters.
> + */
> +int pl353_smc_set_cycles(struct device *dev, u32 t0, u32 t1, u32 t2, u32 t3,
> + u32 t4, u32 t5, u32 t6)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + if ((t0 < PL353_NAND_T0_MIN) || (t0 > PL353_NAND_T0_MAX))
> + goto err;
> + if ((t1 < PL353_NAND_T1_MIN) || (t1 > PL353_NAND_T1_MAX))
> + goto err;
> + if ((t2 < PL353_NAND_T2_MIN) || (t2 > PL353_NAND_T2_MAX))
> + goto err;
> + if ((t3 < PL353_NAND_T3_MAX) || (t3 > PL353_NAND_T3_MAX))
> + goto err;
> + if (t4 > PL353_NAND_T4_MAX)
> + goto err;
> + if (t5 > PL353_NAND_T5_MAX)
> + goto err;
> + if (t6 > PL353_NAND_T6_MAX)
> + goto err;
> +
> + t0 &= PL353_SMC_SET_CYCLES_T0_MASK;
> + t1 = (t1 & PL353_SMC_SET_CYCLES_T1_MASK) <<
> + PL353_SMC_SET_CYCLES_T1_SHIFT;
> + t2 = (t2 & PL353_SMC_SET_CYCLES_T2_MASK) <<
> + PL353_SMC_SET_CYCLES_T2_SHIFT;
> + t3 = (t3 & PL353_SMC_SET_CYCLES_T3_MASK) <<
> + PL353_SMC_SET_CYCLES_T3_SHIFT;
> + t4 = (t4 & PL353_SMC_SET_CYCLES_T4_MASK) <<
> + PL353_SMC_SET_CYCLES_T4_SHIFT;
> + t5 = (t5 & PL353_SMC_SET_CYCLES_T5_MASK) <<
> + PL353_SMC_SET_CYCLES_T5_SHIFT;
> + t6 = (t6 & PL353_SMC_SET_CYCLES_T6_MASK) <<
> + PL353_SMC_SET_CYCLES_T6_SHIFT;
> +
> + t0 |= t1 | t2 | t3 | t4 | t5 | t6;
> +
> + writel(t0, pl353_smc->base + PL353_SMC_SET_CYCLES_OFFS);
> + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc->base +
> + PL353_SMC_DIRECT_CMD_OFFS);
> +
> + return 0;
> +err:
> + return -EINVAL;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_set_cycles);
> +
> +/**
> + * pl353_smc_ecc_is_busy_noirq - Read ecc busy flag
> + * @dev: Pointer to the device struct
> + * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle
> + */
> +static int pl353_smc_ecc_is_busy_noirq(struct device *dev)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + return !!(readl(pl353_smc->base + PL353_SMC_ECC_STATUS_OFFS) &
> + PL353_SMC_ECC_STATUS_BUSY);
> +}
> +
> +/**
> + * pl353_smc_ecc_is_busy - Read ecc busy flag
> + * @dev: Pointer to the device struct
> + * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle
> + */
> +int pl353_smc_ecc_is_busy(struct device *dev)
> +{
> + int ret;
> +
> + ret = pl353_smc_ecc_is_busy_noirq(dev);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy);
> +
> +/**
> + * pl353_smc_get_ecc_val - Read ecc_valueN registers
> + * @dev: Pointer to the device struct
> + * @ecc_reg: Index of the ecc_value reg (0..3)
> + * Return: the content of the requested ecc_value register.
> + *
> + * There are four valid ecc_value registers. The argument is truncated to stay
> + * within this valid boundary.
> + */
> +u32 pl353_smc_get_ecc_val(struct device *dev, int ecc_reg)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> + u32 addr, reg;
> +
> + ecc_reg &= 3;
> + addr = PL353_SMC_ECC_VALUE0_OFFS + (ecc_reg << 2);
> + reg = readl(pl353_smc->base + addr);
> +
> + return reg;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val);
> +
> +/**
> + * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit
> + * @dev: Pointer to the device struct
> + * Return: the raw_int_status1 bit from the memc_status register
> + */
> +int pl353_smc_get_nand_int_status_raw(struct device *dev)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> + u32 reg;
> +
> + reg = readl(pl353_smc->base + PL353_SMC_MEMC_STATUS_OFFS);
> + reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT;
> + reg &= 1;
> +
> + return reg;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw);
> +
> +/**
> + * pl353_smc_clr_nand_int - Clear NAND interrupt
> + * @dev: Pointer to the device struct
> + */
> +void pl353_smc_clr_nand_int(struct device *dev)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + writel(PL353_SMC_CFG_CLR_INT_CLR_1,
> + pl353_smc->base + PL353_SMC_CFG_CLR_OFFS);
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int);
> +
> +/**
> + * pl353_smc_set_ecc_mode - Set SMC ECC mode
> + * @dev: Pointer to the device struct
> + * @mode: ECC mode (BYPASS, APB, MEM)
> + * Return: 0 on success or negative errno.
> + */
> +int pl353_smc_set_ecc_mode(struct device *dev, enum pl353_smc_ecc_mode mode)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> + u32 reg;
> + int ret = 0;
> +
> + switch (mode) {
> + case PL353_SMC_ECCMODE_BYPASS:
> + case PL353_SMC_ECCMODE_APB:
> + case PL353_SMC_ECCMODE_MEM:
> +
> + reg = readl(pl353_smc->base + PL353_SMC_ECC_MEMCFG_OFFS);
> + reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK;
> + reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT;
> + writel(reg, pl353_smc->base + PL353_SMC_ECC_MEMCFG_OFFS);
> +
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode);
> +
> +/**
> + * pl353_smc_set_ecc_pg_size - Set SMC ECC page size
> + * @dev: Pointer to the device struct
> + * @pg_sz: ECC page size
> + * Return: 0 on success or negative errno.
> + */
> +int pl353_smc_set_ecc_pg_size(struct device *dev, unsigned int pg_sz)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> + u32 reg, sz;
> +
> + switch (pg_sz) {
> + case 0:
> + sz = 0;
> + break;
> + case 512:
> + sz = 1;
> + break;
> + case 1024:
> + sz = 2;
> + break;
> + case 2048:
> + sz = 3;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + reg = readl(pl353_smc->base + PL353_SMC_ECC_MEMCFG_OFFS);
> + reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK;
> + reg |= sz;
> + writel(reg, pl353_smc->base + PL353_SMC_ECC_MEMCFG_OFFS);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size);
> +
> +
> +/**
> + * pl353_smc_get_clkrate - Obtain the current clock rate
> + * @dev: Pointer to the device struct
> + * Return: the current clock rate.
> + */
> +ulong pl353_smc_get_clkrate(struct device *dev)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + return clk_get_rate(pl353_smc->memclk);
> +}
> +EXPORT_SYMBOL_GPL(pl353_smc_get_clkrate);
> +
> +static int __maybe_unused pl353_smc_suspend(struct device *dev)
> +{
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + clk_disable(pl353_smc->memclk);
> + clk_disable(pl353_smc->aclk);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused pl353_smc_resume(struct device *dev)
> +{
> + int ret;
> + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
> +
> + ret = clk_enable(pl353_smc->aclk);
> + if (ret) {
> + dev_err(dev, "Cannot enable axi domain clock.\n");
> + return ret;
> + }
> +
> + ret = clk_enable(pl353_smc->memclk);
> + if (ret) {
> + dev_err(dev, "Cannot enable memory clock.\n");
> + clk_disable(pl353_smc->aclk);
> + return ret;
> + }
> + return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend,
> + pl353_smc_resume);
> +
> +/**
> + * pl353_smc_init_nand_interface - Initialize the NAND interface
> + * @pdev: Pointer to the platform_device struct
> + * @nand_node: Pointer to the pl353_nand device_node struct
> + */
> +static void pl353_smc_init_nand_interface(struct platform_device *pdev,
> + struct device_node *nand_node)
> +{
> + unsigned long timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT;
> + struct pl353_smc_data *pl353_smc = platform_get_drvdata(pdev);
> +
> + pl353_smc_set_buswidth(&pdev->dev, PL353_SMC_MEM_WIDTH_8);
> +
> + writel(PL353_SMC_CFG_CLR_INT_CLR_1,
> + pl353_smc->base + PL353_SMC_CFG_CLR_OFFS);
> + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc->base +
> + PL353_SMC_DIRECT_CMD_OFFS);
> + /* Wait till the ECC operation is complete */
> + do {
> + if (pl353_smc_ecc_is_busy_noirq(&pdev->dev))
> + msleep(1);
> + else
> + break;
> + } while (!time_after_eq(jiffies, timeout));
> +
> + if (time_after_eq(jiffies, timeout))
> + dev_err(&pdev->dev, "nand ecc busy status timed out");
> + /* Set the command1 and command2 register */
> + writel(PL353_NAND_ECC_CMD1,
> + pl353_smc->base + PL353_SMC_ECC_MEMCMD1_OFFS);
> + writel(PL353_NAND_ECC_CMD2,
> + pl353_smc->base + PL353_SMC_ECC_MEMCMD2_OFFS);
> +}
> +
> +static const struct of_device_id matches_nor[] = {
> + { .compatible = "cfi-flash" },
> + {}
> +};
> +
> +static const struct of_device_id matches_nand[] = {
> + { .compatible = "arm,pl353-nand-r2p1" },
> + {}
> +};
> +
> +static int pl353_smc_probe(struct platform_device *pdev)
> +{
> + struct pl353_smc_data *pl353_smc;
> + struct device_node *child;
> + struct resource *res;
> + int err;
> + struct device_node *of_node = pdev->dev.of_node;
> + const struct of_device_id *matches = NULL;
> +
> + pl353_smc = devm_kzalloc(&pdev->dev, sizeof(*pl353_smc), GFP_KERNEL);
> + if (!pl353_smc)
> + return -ENOMEM;
> +
> + /* Get the NAND controller virtual address */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pl353_smc->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(pl353_smc->base))
> + return PTR_ERR(pl353_smc->base);
> +
> + pl353_smc->aclk = devm_clk_get(&pdev->dev, "aclk");
> + if (IS_ERR(pl353_smc->aclk)) {
> + dev_err(&pdev->dev, "aclk clock not found.\n");
> + return PTR_ERR(pl353_smc->aclk);
> + }
> +
> + pl353_smc->memclk = devm_clk_get(&pdev->dev, "memclk");
> + if (IS_ERR(pl353_smc->memclk)) {
> + dev_err(&pdev->dev, "memclk clock not found.\n");
> + return PTR_ERR(pl353_smc->memclk);
> + }
> +
> + err = clk_prepare_enable(pl353_smc->aclk);
> + if (err) {
> + dev_err(&pdev->dev, "Unable to enable AXI clock.\n");
> + return err;
> + }
> +
> + err = clk_prepare_enable(pl353_smc->memclk);
> + if (err) {
> + dev_err(&pdev->dev, "Unable to enable memory clock.\n");
> + goto out_clk_dis_aper;
> + }
> +
> + platform_set_drvdata(pdev, pl353_smc);
> +
> + /* clear interrupts */
> + writel(PL353_SMC_CFG_CLR_DEFAULT_MASK,
> + pl353_smc->base + PL353_SMC_CFG_CLR_OFFS);
> +
> + /* Find compatible children. Only a single child is supported */
> + for_each_available_child_of_node(of_node, child) {
> + if (of_match_node(matches_nand, child)) {
> + pl353_smc_init_nand_interface(pdev, child);
> + if (!matches) {
> + matches = matches_nand;
> + } else {
> + dev_err(&pdev->dev,
> + "incompatible configuration\n");
> + goto out_clk_disable;
> + }
> + }
> +
> + if (of_match_node(matches_nor, child)) {
> + static int counts;
> +
> + if (!matches) {
> + matches = matches_nor;
> + } else {
> + if (matches != matches_nor || counts > 1) {
> + dev_err(&pdev->dev,
> + "incompatible configuration\n");
> + goto out_clk_disable;
> + }
> + }
> + counts++;
> + }
> + }
> +
> + if (matches)
> + of_platform_populate(of_node, matches, NULL, &pdev->dev);
> +
> + return 0;
> +
> +out_clk_disable:
> + clk_disable_unprepare(pl353_smc->memclk);
> +out_clk_dis_aper:
> + clk_disable_unprepare(pl353_smc->aclk);
> +
> + return err;
> +}
> +
> +static int pl353_smc_remove(struct platform_device *pdev)
> +{
> + struct pl353_smc_data *pl353_smc = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(pl353_smc->memclk);
> + clk_disable_unprepare(pl353_smc->aclk);
> +
> + return 0;
> +}
> +
> +/* Match table for device tree binding */
> +static const struct of_device_id pl353_smc_of_match[] = {
> + { .compatible = "arm,pl353-smc-r2p1" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, pl353_smc_of_match);
> +
> +static struct platform_driver pl353_smc_driver = {
> + .probe = pl353_smc_probe,
> + .remove = pl353_smc_remove,
> + .driver = {
> + .name = "pl353-smc",
> + .owner = THIS_MODULE,
> + .pm = &pl353_smc_dev_pm_ops,
> + .of_match_table = pl353_smc_of_match,
> + },
> +};
> +
> +module_platform_driver(pl353_smc_driver);
> +
> +MODULE_AUTHOR("Xilinx, Inc.");
> +MODULE_DESCRIPTION("ARM PL353 SMC Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/memory/pl353-smc.h b/include/linux/memory/pl353-smc.h
> new file mode 100644
> index 0000000..47a1322
> --- /dev/null
> +++ b/include/linux/memory/pl353-smc.h
> @@ -0,0 +1,37 @@
> +/*
> + * ARM PL353 SMC Driver Header
> + *
> + * Copyright (C) 2012 Xilinx, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __LINUX_MEMORY_PL353_SMC_H
> +#define __LINUX_MEMORY_PL353_SMC_H
> +
> +enum pl353_smc_ecc_mode {
> + PL353_SMC_ECCMODE_BYPASS = 0,
> + PL353_SMC_ECCMODE_APB = 1,
> + PL353_SMC_ECCMODE_MEM = 2
> +};
> +
> +enum pl353_smc_mem_width {
> + PL353_SMC_MEM_WIDTH_8 = 0,
> + PL353_SMC_MEM_WIDTH_16 = 1
> +};
> +
> +u32 pl353_smc_get_ecc_val(struct device *dev, int ecc_reg);
> +int pl353_smc_ecc_is_busy(struct device *dev);
> +int pl353_smc_get_nand_int_status_raw(struct device *dev);
> +void pl353_smc_clr_nand_int(struct device *dev);
> +int pl353_smc_set_ecc_mode(struct device *dev, enum pl353_smc_ecc_mode mode);
> +int pl353_smc_set_ecc_pg_size(struct device *dev, unsigned int pg_sz);
> +int pl353_smc_set_buswidth(struct device *dev, unsigned int bw);
> +int pl353_smc_set_cycles(struct device *dev, u32 t0, u32 t1, u32 t2, u32 t3,
> + u32 t4, u32 t5, u32 t6);
> +ulong pl353_smc_get_clkrate(struct device *dev);
> +
> +#endif
> --
> 1.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
