Re: [PATCH v2 4/8] input: goodix: reset device at init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 2015-06-09 at 17:34 +0200, Bastien Nocera wrote:
> On Mon, 2015-06-08 at 17:37 +0300, Irina Tirdea wrote:
> > After power on, it is recommended that the driver resets the 
> > device.
> > The reset procedure timing is described in the datasheet and is 
> > used
> > at device init (before writing device configuration) and
> > for power management. It is a sequence of setting the interrupt
> > and reset pins high/low at specific timing intervals. This 
> > procedure
> > also includes setting the slave address to the one specified in the
> > ACPI/device tree.
> 
> This breaks the touchscreen on my Onda v975w:
> [  239.732858] Goodix-TS i2c-GDIX1001:00: ID 9271, version: 1020
> [  239.732977] Goodix-TS i2c-GDIX1001:00: Failed to get reset GPIO: 
> -16
> [  239.736071] Goodix-TS: probe of i2c-GDIX1001:00 failed with error 
> -16
> 
> This is the DSDT for that device:
> https://bugzilla.kernel.org/attachment.cgi?id=149331

(Note that this means that I haven't been able to test any following
patches in that series than 4/8).
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux