Re: [PATCH v2 4/8] input: goodix: reset device at init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, 2015-06-08 at 17:37 +0300, Irina Tirdea wrote:
> After power on, it is recommended that the driver resets the device.
> The reset procedure timing is described in the datasheet and is used
> at device init (before writing device configuration) and
> for power management. It is a sequence of setting the interrupt
> and reset pins high/low at specific timing intervals. This procedure
> also includes setting the slave address to the one specified in the
> ACPI/device tree.

This breaks the touchscreen on my Onda v975w:
[  239.732858] Goodix-TS i2c-GDIX1001:00: ID 9271, version: 1020
[  239.732977] Goodix-TS i2c-GDIX1001:00: Failed to get reset GPIO: -16
[  239.736071] Goodix-TS: probe of i2c-GDIX1001:00 failed with error -16

This is the DSDT for that device:
https://bugzilla.kernel.org/attachment.cgi?id=149331
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux