Hi,
On 02-06-15 23:49, Maxime Ripard wrote:
On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote:
Hi,
On 06/02/2015 05:58 PM, Maxime Ripard wrote:
On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
the same dts for both models. Unfortunately this does not work for the otg
controller, on the M9 this is routed to a micro-usb connector on the outside,
while as on the A1000G-quad it is connected to an usb to sata bridge
(which is not populated on the M9 pcb).
This commit adds a new dts for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
Didn't we say that we were trying to set the vendor name in the DTs
now, at least for the new ones?
I think we said that Paul would write a proposal to standardize
naming for future boards, but that never materialized.
I can fix this and apply it if it's ok for you.
I'm fine with throwing -mele- in there, or not, what ever you
prefer.
Ok, applied and fixed the name.
This is probably going to be the last patch pulled for 4.2, unless
something important shows up in the next few days.
That is fine with me, the only thing which I've pending on the dts
side is a hole lot of musb related patches which belong in 4.3 anyways.
What about the "ARM: dts: sun8i: Add Ippo-q8h v1.2 with A33 and 1024x600 lcd support"
commit? You had a remark on doing that differently to which I replied,
so that one is still in limbo a bit...
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
